IFM MFS202 Manual


Læs gratis den danske manual til IFM MFS202 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 25 anmeldelser. Har du et spørgsmål om IFM MFS202, eller vil du spørge andre brugere om produktet?

Side 1/4
Installation Instructions
Magnetic sensor
ME / MFS / MGS / MGT / MN / MS
UK
UK
UK
UK
UK
MFSxxx / 00 10 / 2015
2
1 Preliminary note
1.1 Symbols used
Instruction
Cross-reference
Important note
Non-compliance may result in malfunction or interference.
2 Function and features
The sensor reacts to magnetic fields. It detects a magnet without contact and
signals its presence by means of an output signal.
The nominal sensing range (Sn) can be seen in the type designation on the type
label on the unit (the value applies to a damping magnet M 4.0).
MEA3060-BPKG
= nominal sensing range in mm
The sensor detects magnets through
all non-magnetizable materials (e.g.
non-ferrous metals, stainless steel,
plastic, wood).
N S
3 Installation
Mount the sensor by means of
amounting bracket or a mounting
device.
Flush mountable in all non-
magnetizable materials.
N S
When mounted in magnetizable
materials an open space must be left:
a = 10 mm (at Sn = 60 mm)
a = 15 mm (at Sn = 70 mm).
N S
0,6 Sn


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: MFS202

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM MFS202 stil et spørgsmål nedenfor, og andre brugere vil svare dig