IFM O4S200 Manual


Læs gratis den danske manual til IFM O4S200 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om IFM O4S200, eller vil du spørge andre brugere om produktet?

Side 1/3
Installation instructions
Through-beam sensor
O4S2xx / O4E2xx
706270 / 00 11 / 2012
UK
2
Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switched signal.
Range: 50 m.
Installation
12
1: Transmitter
2: Receiver
Mount the receiver (O4E ...) by means of a mounting fixture. Then align the trans-
mitter (O4S ...) to the receiver and fix it in the same way.
Maximum range is only achieved with precise alignment.
Electrical connection
Disconnect power before connecting the sensor. Connection strictly to the
indications on the type label.
Operation
Check the safe functioning of the sensor.
• The green LED (transmitter) lights when the unit is ready for operation.
• The yellow LED lights (receiver) when the switching output is switched.
Maintenance
Keep the lens of the sensor free from soiling. For cleaning do not use any solvents
or cleaning agents which could damage the plastic lenses.


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: O4S200

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM O4S200 stil et spørgsmål nedenfor, og andre brugere vil svare dig