IFM O5P201 Manual


Læs gratis den danske manual til IFM O5P201 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om IFM O5P201, eller vil du spørge andre brugere om produktet?

Side 1/2
Installation instructions
Retro-reflective sensor
O5
701933 / 01 10 / 2005
UK
UK
UK
UKUK
UK
2
Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective
sensor detects objects and materials without contact and indicates their presence
by a switched signal.
Range O5P...: 7 m (retro-reflective sensor with polarizationfilter); (values referred
to prismatic reflector with
Ø
80 mm and 50 mm).
Installation
Place prismatic reflector or reflective tape behind the object to be detected.
Align the photocell and fasten it to a mounting bracket.
Maximum range is only achieved with precise alignment.
Electrical connection
Disconnect power before connecting the sensor.
Connection strictly to the indications on the type label.
Operation
Check the safe functioning of the sensor.
The LED lights when the switching output is switched. >
Maintenance
Keep the lens of the sensor free from soiling.
For cleaning do not use any solvents or cleaning agents which could damage
the plastic lenses.


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: O5P201

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM O5P201 stil et spørgsmål nedenfor, og andre brugere vil svare dig