IFM OGE103 Manual


Læs gratis den danske manual til IFM OGE103 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6 anmeldelser. Har du et spørgsmål om IFM OGE103, eller vil du spørge andre brugere om produktet?

Side 1/3
Operating instructions
Through-beam sensor
OGE1xx / OGS1xx
UK
UK
UK
UK
UK
OGE100 / 00 11 / 2009
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
Range: packaging or data sheet.
3 Installation
transmitter receiver
LED1:
Secure the receiver to a bracket.
Align the transmitter to the receiver and secure it in the same way.
Maximum range only with accurate alignment.
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electri-
cal equipment must be adhered to.
Ensure a voltage supply according to EN 50178, SELV, PELV.
Disconnect power.
Connect the unit as follows:


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: OGE103

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM OGE103 stil et spørgsmål nedenfor, og andre brugere vil svare dig