IFM TY9307 Manual


Læs gratis den danske manual til IFM TY9307 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om IFM TY9307, eller vil du spørge andre brugere om produktet?

Side 1/3
Installation instructions
Temperature transmitter
TY9307
706258 / 00 10 / 2012
UK
2
1 Safety instructions
Please read this document and the technical data sheet prior to set-up of the
unit. Check the compatibility of the product materials with the media to be
measured in all applications. Ensure that the product is suitable for your appli-
cation without any restrictions.
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property can occur.
2 Functions and features
The temperature transmitter detects the system temperature and converts it into
an analogue output signal (0...10 V).
Measuring range: 0...80 °C / 32...176 °F
Measuring element: Pt 1000 to DIN EN 60751, class A
3 Installation
Ensure that no pressure is applied to the installation while mounting or
removing the sensor.
Insert the unit in a G¼ process connection
Tighten firmly. Tightening torque: max. 25 Nm
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical
equipment must be adhered to.
Voltage supply to EN 50178, SELV, PELV.
Disconnect power.
Connect the unit as follows:
43
2 1
L+
L
1
2
3


Produkt Specifikationer

Mærke: IFM
Kategori: Ikke kategoriseret
Model: TY9307

Har du brug for hjælp?

Hvis du har brug for hjælp til IFM TY9307 stil et spørgsmål nedenfor, og andre brugere vil svare dig