IHome TIMEBASE iBTW20 Manual

IHome Højttaler TIMEBASE iBTW20

Læs gratis den danske manual til IHome TIMEBASE iBTW20 (6 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12 anmeldelser. Har du et spørgsmål om IHome TIMEBASE iBTW20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

FEATURES & FUNCTIONS

QUESTIONS? visit www.ihomeintl.com

Model: iBTW20

Quick Start Guide

GETTING STARTED

Remove battery pull tab from bottom

of unit. Connect the included AC

adapter to the DC jack on back of unit

and the other end to a working wall

outlet.

Wireless Charging Stand + Speaker

TIMEBASE

• Press and hold Bluetooth Pairing

Button on the TIMEBASE to enter

pairing mode.

• Select ‘iHome iBTW20’ on Bluetooth

menu to connect!

Battery Backup

Compartment

TIME SET

*Before use, remove battery pull tab

POWER/ALARM RESET

Wireless Charging

ALARM SET

Wireless Charging

Status LED

- Press to Snooze Alarm

- Press & Hold to Adjust Snooze

Duration (adjust with +/- and press

ZZZ to conﬁrm)

- Press to Adjust Display Brightness

Snooze (ZZZ)

MINUS

PLAY/PAUSE

- Press to Play/Pause audio or to answer calls

- Press and Hold to end or ignore a call

- Press & Hold to activate Google/Siri

Alarm

Indicator

Low Backup

Battery

Indicator

PM Indicator

DISPLAY ICONS

• Press and hold Time Button until

display ﬂashes.

• Use +/- Buttons to adjust time.

• Press Time Button to conﬁrm.

• Use +/- Buttons to adjust year, and

press Time Button to conﬁrm.

• Use +/- Buttons to adjust month,

and press Time Button to conﬁrm.

• Use +/- Buttons to adjust date, and

press Time Button to conﬁrm

settings.

Set the correct

AM/PM time. The PM

indicator will appear

on the display. There

is no AM indicator.

BOTTOM PANEL*FRONT PANEL

usb charging

SETTING THE ALARM

1. Press and hold Alarm Button until display ﬂashes.

2. Press – or + Buttons to adjust alarm time (hold for rapid setting).

Set the correct AM/PM alarm time. PM indicator appears on the

display.

3. Press Alarm Button to conﬁrm alarm time. Choose alarm

schedule: 7 (every day), 5 (weekdays) or 2 (weekend only). Press

the – or + Buttons to select schedule.

4. Press Alarm Button to conﬁrm. Use – or + Buttons to set wake to

source:

Tones: Wake to tones. Press – or + Buttons to select.

Bluetooth: Wake to audio from a connected Bluetooth device.

Beep: Wake to beeping.

5. Press Alarm Button to conﬁrm. Use – or + Buttons to control

alarm volume and press Alarm Button to conﬁrm settings. The

alarm icon on the display indicates the alarm is armed.

6. To turn o a sounding alarm and reset it to come on the next day,

press the Alarm Button.

PREVIEWING THE ALARM

Press and release the Alarm Button to preview the alarm and to

toggle the alarm ON (indicated by the alarm icon) or OFF (no alarm

icon).

PROGRAMMABLE SNOOZE

1. Press and hold ZZZ Button during normal operation (when no

alarm is sounding).

2. Press + or - Buttons to select a snooze time (1-29 minutes).

3. Press ZZZ Button to conﬁrm. When alarm is sounding, press

down on ZZZ Button to temporarily silence alarm (9 minutes is

the default).

WIRELESS CHARGING

Supports:

• Qi compatible phones (with plastic cases up to 3mm thick*)

Place Qi compatible device face up on charging rest:

Wireless Charging LED under iHome badge shows charging status:

Slow blinking LED: Device is charging properly.

Solid LED: Device is charged.

Rapid blinking LED: Device not charging. Reposition device.

(LED may continue to blink slowly when iOS devices are fully

charged.)

CAUTION:

Remove metal protective or magnetic case from phone before

charging. When charging phone, do not place magnetic-striped or

other metal objects on the charger. Doing so could damage the

object or this unit. Qi compatible phones with metallic looking

ﬁnishes will charge normally.

* Some larger size phone cases may not be able to charge. Remove

case to charge phone properly.

USB CHARGING

Connect a USB cable (not included)

to the USB port on the back of the

unit to charge devices. (Unit must

be plugged into a working outlet to

charge devices.)

BATTERY BACK-UP

A CR-2450 back-up battery is installed to provide continuous

clock settings if a temporary power failure occurs. Remove the

battery pull tab before use. When battery icon on the clock display

is ﬂashing, replace the back-up battery. The battery compartment

is on the bottom of the unit.

1. The AC adapter must be

connected, or you will lose time and

alarm settings during battery

replacement.

2. Use a Phillips screwdriver to open

the battery compartment door.

3. Remove exhausted battery and

insert 1 CR-2450 battery, with the +

side facing you. Replace door. Do

not overtighten.

WARNING

• Do not ingest the battery, Chemical Burn Hazard. This product

contains a coin/button cell battery. If the coin/button cell battery

is swallowed, it can cause severe internal burns in just 2 hours and

can lead to death.

• Keep new and used batteries away from children. If the battery

compartment does not close securely, stop using the product and

keep it away from children. If you think batteries mtight have been

swallowed or placed inside any part of the body, seek immediate

medical attention.”

• CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY

AN INCORRECT TYPE. DISPOSE OF USED BATTERIES

ACCORDING TO THE INSTRUCTIONS.

• The mains plug of power adaptor is used as the disconnect device, it

shall remain readily operable.

IMPORTANT SAFETY INSTRUCTIONS

Please heed all warnings, read and follow all instructions and keep

these instructions handy for future reference.

1. Do not use this product near water, and clean only with dry

cloth.

2. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

3. Heat – This product should be situated away from heat

sources such as radiators, heat registers, stoves or other

appliances (including ampliﬁers) that produce heat.

4. Only use attachments/accessories speciﬁed by the

manufacturer.

5. Unplug this product during lightning storms or when unused

for long periods of time.

6. Damage Requiring Service – This product should be serviced

by qualiﬁed service personnel when:

- Plug has been damaged.

- Objects have fallen into or liquid has been spilled into the

enclosure.

- The unit has been exposed to rain. The unit has been

dropped or the enclosure damaged.

- The unit exhibits a marked change in performance or does

not operate normally.

7. No naked ﬂame sources, such as lighted candles, should be

placed on this product.

8. Attention should be drawn to the environmental aspects of

battery disposal.

9. This product is suitable for use in tropical and/or moderate

climates.

10. WARNING: To reduce the risk of ﬁre or electric shock, do not

expose this product to rain or moisture.

11. Do not dispose of batteries in the household trash or ﬁre.

12. The mains plug of power adaptor is used as the disconnect

device, it shall remain readily operable.

PLUS

Wireless Charging Status LED

Wireless Charging Area

For product support information please visit:

www.ihomeintl.com/help/iBTW20

Questions? Visit www.ihomeintl.com

AC adapter Information for ErP (EU) requirement

Manufacturer's name

and address

SDI Technologies Inc.

1299 Main Street, Rahway, NJ 07065, U.S.A.

Model BQ30B-0903000-M

AC100-240V

50/60Hz

DC9V

27W

88.6%

87.5%

0.05W

Input voltage

Input AC frequency

Output voltage

Output current

Output power

Average active eciency

Eciency at low load (10%)

No-load power consumption

This product bears the selective sorting symbol for waste

electrical and electronic equipment (WEEE).

This means that this product must be handled pursuant

to European Directive 2012/19/EU in order to be recycled

or dismantled to minimize its impact on the environment.

For further information, please contact your local or

regional authorities.

Electronic products not included in the selective sorting

process are potentially dangerous for the environment and

human health due to the presence of hazardous

substances.

BACK PANEL

Hour Adjust

USB Charging

(5V/1A)

DC Jack

(9V/3A)

-1 +1 Auto

hour adjust

usb charging

DC 9V, 3A

Bluetooth Pairing

Button/LED

To adjust the brightness of the display, press the Time Set Button

repeatedly.

Connecting the Unit

Step One

Connecting to Bluetooth

Step Two

Setting the Time

Step Three

iHome

iBTW20

iBTW20EQSG-042020-A

-1 +1 Auto

DSTusb chargingDC 9V, 3A

RESET

TEST

Produkt Specifikationer

Mærke:	IHome
Kategori:	Højttaler
Model:	TIMEBASE iBTW20

Har du brug for hjælp?

Hvis du har brug for hjælp til IHome TIMEBASE iBTW20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler IHome Manualer

28 September 2025

28 September 2025

27 September 2025

27 September 2025

IHome iHSI-W400BT-PR-BLK Manual

27 September 2025

IHome iHSI-W400BT-PR-WHT Manual

27 September 2025

IHome iBT158 Manual

27 September 2025

IHome PLAYGLOW iBT780 Manual

19 Juni 2025

IHome iAVS16 Manual

3 Juni 2025

IHome Zenergy Sunrise Manual

3 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Wet Sounds REV10 SE Manual

30 Oktober 2025

RetroSound R-507N Manual

29 Oktober 2025

TDK TP6803BLK Manual

28 Oktober 2025

TDK TREK Flex A28 Manual

28 Oktober 2025

Altec Lansing inMotion iM4 Manual

24 Oktober 2025

Vonyx VX822 Manual

21 Oktober 2025

Memphis Audio SRX42 Manual

19 Oktober 2025

Memphis Audio MS62 Manual

19 Oktober 2025

Madison MAD-CENTER120 Manual

19 Oktober 2025

Goji Mini GMINIG17 Manual

19 Oktober 2025