Ikan OTT-CONTROLLER Manual

Ikan Joystick OTT-CONTROLLER

Læs gratis den danske manual til Ikan OTT-CONTROLLER (14 sider) i kategorien Joystick. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Ikan OTT-CONTROLLER, eller vil du spørge andre brugere om produktet?

Side 1/14
OTT-CONTROLLER
Manual
OTTICA IP PTZ Camera Controller VISCA, ONVIF, PELCO
www.ikancorp.com sales@ikancorp.com
- 2 -
1. What is the function of CAM NUM when adding a network device?
CAM NUM will be associated and bound with the currently entered IP and port information.
It will quickly switch to the CAM NUM bound device when adding a device with the “CAM”
button.
2. How do I enter an IP address?
The camera controller doesn’t have a “.” button, so please enter the IP address with four
segments.
Take the IP address 192.168.0.1 for example. It will automatically jump to next segment when
finished inputting a segment with three numbers, 192 and 168; but after inputting a segment
with only one number, 0, you must move the joystick rightward to switch over to the next
segment to continue inputting.
3. How do I clear while in input mode?
Move the joystick leftward to clear the input information.
4. The home page of each mode refers to the displayed page when the controller
initialization is complete.
In IP VISCA and ONVIF Mode, if you see the prompts of “Visca!” and “Onvif!”, the IP
address displayed on the screen is local IP address of the controller. While the prompts of
“Visca:” and “Onvif:” are shown on the page, the IP address displayed on-screen belongs to
the connected device.
Precautions


Produkt Specifikationer

Mærke: Ikan
Kategori: Joystick
Model: OTT-CONTROLLER

Har du brug for hjælp?

Hvis du har brug for hjælp til Ikan OTT-CONTROLLER stil et spørgsmål nedenfor, og andre brugere vil svare dig