Ikan PT4200-P2P-TK Manual

Ikan Ikke kategoriseret PT4200-P2P-TK

Læs gratis den danske manual til Ikan PT4200-P2P-TK (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Ikan PT4200-P2P-TK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re ﬁlmmakers too

PT4200-P2P

Quick Start Guide

Ikan P2P Interview System with 2 x 12” Teleprompters

What’s Included

2 x PT4200

2 x 25 ft HDMI Cable

www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re ﬁlmmakers too

Overview

When using the Ikan’s P2P Interview System, the interviewer and the interviewee are able to look directly into the camera lens while still seeing and

looking directly at an image of each other. This equates to a natural one-on-one interview style which is also, because of the direct eye contact, much more

involving for the audience. When the interviewer asks a question, he or she is looking right into the eyes of the viewer. When the interviewee answers the

question, he or she is also looking directly into the eyes of the audience and in essence giving his or her answers to them. No longer is the audience sitting

off to the side and observing the interview; they become a part of the interview.

Step 1

Attach the two 15mm rod monitor adapters to back of the monitor’s VESA

mounts with the 4 screws using the smaller hex key.

Step 2

Using the larger hex key loosen the rod clamps.

Step 3

On the teleprompter base loosen the top 4 screws holding the rods in place.

Step 4

After loosening the following two screws on the base pull the rods out to

accommodate the monitor. Tighten all 6 screws after rods are extended.

Teleprompter Assmebly Setup