Service
Only
100-240V AC ~ 50/60Hz
Power AC
Max Power Consumption: 120W
Aux In RL Audio In Optical In ARC
Optical In R LAudio In Aux InARC
To talk to us, call +44 (0)203 514 1521 (UK Local) or 1-877-357-8204 (USA)
Only one audio connection to your TV is
required, in order of preference:
1. Optical: If available on your TV, use this for
2. ARC: If your TV has a socket labelled ARC
3. RCA: Connect both left and right channels
4. AUX In: Connect to the headphone output
of your TV if neither ARC or optical are
Note: If the 3.5mm socket is used it takes
priority over the RCA input which will be muted.
PLACEMENT! TV5 IS DESIGNED TO BE PLACED UNDER YOUR TV. THE TV MUST HAVE A BASE NO WIDER THAN 725MM
(28.5”) AND NO DEEPER THAN 300MM (12”) AND MUST WEIGH NO MORE THAN 30KG (66LBS). IF THE TV BASE IS TOO
LARGE TO FIT, PLACE TV5 ON A LOWER SHELF OF YOUR TV RACK
AUX Line in Optical in AC power socket ARC
TV5 TV speaker base with bluetooth
There are 4 dierent modes that can be selected to enhance your sound
experience. You can also Increase or decrease the Subwoofer output.
TV: Greatly improved TV sound.
Music: Enhances stereo music and music videos.
Film: Designed to get the best sound from movies.
Voice: Enhances voices to improve intelligibility.
automatically turn o after 20
minutes if no sound is playing
When you turn on your TV,
TV5 will detect the sound and
Once paired, music from your device will play
To add another Bluetooth device, repeat from
step 2. TV5 will store up to 8 paired devices
Remove the fabric grille and locate the
control panel. Follow the instructions
remembering to point your TV remote at the
control panel whilst learning.
TV5 is equipped with Bluetooth to allow
wireless playback from any Bluetooth
equipped phone, tablet or computer.
1. Select the Bluetooth input BT on the
2. To connect a Bluetooth device to TV5,
press and hold the BT button and the
3. Consult the instructions of the Bluetooth
device to connect to TV5. Successful
pairing will be signalled by a ‘beep’ from
the unit and the Blue LED will stop
TV5 is only able to decode LPCM(PCM) 2.0 format signal, Please ensure your source output setting is set to LPCM(PCM).
