Ikea NUTID HIN4T Manual

Ikea Komfur NUTID HIN4T

Læs gratis den danske manual til Ikea NUTID HIN4T (7 sider) i kategorien Komfur. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Ikea NUTID HIN4T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

This manual contains important information regarding

safety, the use and maintenance of your new hob. Read the

manual carefully and keep it in an easily accessible place for

future consultation.

Precautions and Advice

1. CAUTION: This cooktop complies with all

applicable safety and electromagnetic

compatibility legislation.

However, individuals fitted with a heart pacemaker

should maintain a safe distance from the appliance.

This is because it is not possible to guarantee that all

pacemakers on the market comply with the standards

in compliance with which this appliance was tested so

it is not possible to provide an absolute guarantee of

the absence of potentially harmful interference.

2. Disposal of packaging materials: The various parts of

the packing must not be sent for waste, but recycled in

conformity with the regulations imposed by local

authorities.

3. This induction hob is designed solely for use as a

domestic appliance. No other type of use is permitted.

The manufacturer declines all responsibility for

inappropriate use.

4. The appliance is not intended for use by persons

(children included) with physical, sensory or mental

impairment or without experience and knowledge of

the appliance, unless supervised or previously instructed

in its use by those responsible for their safety.

5. The cooking zones become extremely hot during use:

be careful and keep children away from the appliance

to avoid the risk of scalding or burns.

6. The letter “H” will appear on the control

panel display to indicate “residual heat” in the

corresponding cooking zone: the temperature

of the cooking zone is above 60 °C: do not

touch the cooking zone or

place any object on it while the letter “H” remains lit.

7. If the surface of the hob should become damaged

(cracked or broken glass), do not use the appliance

and call the After-sales Service immediately.

8. Any repairs or work on the appliance must be carried

out by a qualified technician.

9. This hob is equipped with a thermoprotector to

prevent the risk of its internal circuits being damaged

by high temperatures from external heat sources

(e.g. an undercounter oven). If the temperature of the

electronic circuits exceeds the safety threshold,

the thermoprotector activates, automatically

switching off the hob. The display shows an error

message (see section “Troubleshooting Guide”).

When the temperature returns to within normal levels

the hob is able to be switched on again.

10. Make sure the cooking zones and the bottoms of pots

are dry before use.

11. Do not place metal objects such as kitchen utensils

(knives, forks, spoons, etc.), lids or other similar items

on the cooking zones as they can become very hot.

12. Be extremely vigilant when cooking food with boiling

oil or fat since these can catch fire. If the oil catches

fire, never attempt to put it out with water: switch

the hob off and cover the pot immediately with a lid;

leave the pot on the cooking zone to cool down.

Dispose of the oil in compliance with current

regulations.

13. When you finish cooking, press button .

Before use

Important: The induction cooking zones

will not switch on if pots and pans are not

of the correct dimensions.

Only use pots bearing the symbol

“INDUCTION SYSTEM” (See figure

opposite).

Before switching the hob on, position the pot on the

desired cooking zone.

Existing pots and pans:

Use a magnet to check whether pots or pans are suitable

for use on the induction hob: pots are unsuitable if they

cannot be magnetically detected.

1. Ensure pots have a smooth bottom, otherwise

they may scratch the hob's glass ceramic surface.

Check dishes.

2. Do not use empty pots on the hob, especially

enamelled or aluminium ones. This could result in

damage to both the glass ceramic surface and the

bottom of the pots.

3. Never place hot pots or pans on the hob's control

panel. This could result in damage.

Recommended diameters of pot bottoms

IMPORTANT SAFETY INFORMATION

OK NO

26 cm

17 cm 26 cm

21 cm

14 cm 21 cm

18 cm

14.5 cm

12 cm 18 cm

9 cm 14.5 cm

61901363GB.fm Page 11 Tuesday, January 1, 2002 3:20 AM

Installation must be carried out by a qualified electrician

who is fully aware of current safety and installation

regulations. The manufacturer declines all liability for injury

to persons or animals and for damage to property resulting

from failure to observe the regulations provided in this

chapter.

Electrical connections

•Hob electrical connection must be made before

connecting the appliance to the electricity supply.

•Electrical connection must be carried out in compliance

with the regulations of the local electric utility company.

•Make sure that the voltage indicated on the rating plate

on the underside of the appliance corresponds to the

domestic power supply voltage.

•The appliance must be earthed: use conductors

(including the earth conductor) of the appropriate

size only.

• For electrical connection, use an H05 RR-F type cable as

specified in the table “Power supply voltage”.

The power supply cable must be long enough

to allow the hob to be removed from the

worktop and must be positioned so as to avoid

damage or overheating caused by contact with

the base of the hob itself. Do not use extension leads.

Power supply voltage

If the hob already has a power cable, follow the

instructions given on the label attached to the

cable.

Connect the appliance to the electricity supply

by means of an all-pole disconnect switch with minimum

contact gap of 3 mm.

Connecting to the terminal board

Connect the yellow/green earth wire to the terminal with

the symbol . This wire must be longer than the other

wires.

1. Remove the terminal block cover (A), undoing the

screw and inserting the cover in the terminal block

hinge (B).

2. Strip approx. 70 mm of sheath from the power supply

cable.

3. Strip approx. 10 mm of sheath from the wires. Insert

the power supply cable into the cable clamp and

connect the wires to the terminal board as indicated

in the diagram next to the terminal board itself.

4. Secure the power cable with the cable clamp.

5. Close the cover (C) and screw it on the terminal block

with the removed screw - point (1).

Each time the cooktop is connected to the mains it

carries out an automatic check which lasts several

seconds.

INSTALLATION and ELECTRICAL CONNECTION

Wires Amount x size

230V ~ + 3 X 4 mm2

230-240V ~ + 3 X 4 mm2 (Australia only)

230V 3 ~ + 4 X 1.5 mm2

400V 3N ~ + 5 X 1.5 mm2

400V 2N ~ + 4 x 1.5 mm2

230V

400V 3N ~ 230V ~

230-240V~FOR AU ONLY

230V~FOR UK ONLY

400V 2N ~

230V 3~

ONLY FOR BELGIUM

400V 2N~

FOR NL ONLY

61901363GB.fm Page 12 Tuesday, January 1, 2002 3:20 AM

Produkt Specifikationer

Mærke:	Ikea
Kategori:	Komfur
Model:	NUTID HIN4T

Har du brug for hjælp?

Hvis du har brug for hjælp til Ikea NUTID HIN4T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Komfur Ikea Manualer

Ikea MATMÄSSIG 505.083.03 Manual

18 Januar 2025

Ikea NEDERSTA 105.876.13 Manual

18 Januar 2025

Ikea SKÅLAN 105.235.79 Manual

18 Januar 2025

Ikea SMAKLIG 004.678.85 Manual

18 Januar 2025

Ikea MOTSVARIG 204.620.52 Manual

17 Januar 2025

Ikea LAGAN 804.620.54 Manual

17 Januar 2025

Ikea BLIXTSNABB 004.678.33 Manual

17 Januar 2025

Ikea LAGAN 105.221.22 Manual

17 Januar 2025

Ikea TILLREDA 703.437.83 Manual

17 Januar 2025

Ikea TILLREDA 404.935.09 Manual

16 Januar 2025

Komfur Manualer

Nyeste Komfur Manualer

Vollrath 59500F Manual

15 Juni 2025

AEG TO84IA0FIT Manual

15 Juni 2025

Vollrath HPI4-260002 Manual

15 Juni 2025

Vollrath 59508DW Manual

15 Juni 2025

Vulcan VHP636 Manual

15 Juni 2025

Imperial ISPA 18 Manual

15 Juni 2025

AEG CIB54604BW Manual

15 Juni 2025

Cooking Performance Group 351CPGSP18L Manual

15 Juni 2025

Vollrath 69521 Manual

15 Juni 2025

Vollrath HPI4-260004 Manual

15 Juni 2025