For each wash cycle.
Compartment
For programs with pre-wash only.
(Follow the user instructions)
Electric indicator on control panel (if provided).
Check the rinse aid level
Load the baskets
Select a programme
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid scald,as
the dishes a nd utensils are still hot and more susceptible to break.
They could also dry better.Unload the appliance, starting from the lower basket.
Changing the programme
Add forgotten dishes in the
dishwasher.
Scrape off any large food particles. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
When the working cycle is finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using t he On/Off Button.
If the appiance was under standby mode, it will be power off automaticly after 30 minutes without any
operation.
If the appliance is switched
off during a wash cycle.
Open the door carefully.
Hot steam may escape
when the door is opened!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance
For detailed operating method read the corresponding content on the instruction manual.
Open the door, press the On/Off button to switch on the app liance.
Turn on the water tap and close the door. The machine will start working
after about 10 seconds.
Close the door, press the Program Button until t he selected program lights up.
( See the section entitled Operation instruction )o p
1. A running cycle can only be modified if it has been running for a short time. Otherwise t he detergent
ma
y have already been released and the water already drained. If this is the c ase, the detergent
dispenser must be refilled.
2. Open the door. Press the program button more than 3s to cancel the current program.
3. After cancel the current program, press the program button again to select a n ew program.
4. Close the door, then the dishwasher will start work again.
1.Open the door a little to stop the dishwasher.
2.After the spray arms stop working, you can open the door completely.
3.Add the for
gotten dishes.
4.Close the door, the dishwasher will start running again after 10 seconds.
A
B
C
