Indesit taan 25 Manual

Indesit Køling frysning taan 25

Læs gratis den danske manual til Indesit taan 25 (11 sider) i kategorien Køling frysning. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Indesit taan 25, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/11
GB
2-DOOR FRIDGE
Contents
Installation, 2-3
Positioning and connection
Reversible doors
Description of the appliance, 4
Overall view
Accessories, 5
Start-up and use, 6-7
Starting the appliance
Chiller system
Using the refrigerator to its full potential
Using the freezer to its full potential
Maintenance and care, 8
Switching the appliance off
Cleaning the appliance
Avoiding mould and unpleasant odours
Defrosting the appliance
Replacing the light bulb
Precautions and tips, 9
General safety
Disposal
Respecting and conserving the environment
Troubleshooting, 10
Assistance, 11
Operating Instructions
TAAN 5 W
English,11
GB
2
GB
Installation
! Before placing your new appliance into operation please
read these operating instructions carefully. They contain
important information for safe use, for installation and for
care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free
room.
2. Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to
operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part of
the appliance and any furniture above it, and at least 5
cm between the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat
(direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the
appliance and the wall behind it, fit the spacers supplied
in the installation kit, following the instructions provided.
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the
refrigerator by tightening or loosening the rear feet.
Electrical connections
After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to
the electricity mains. Before inserting the plug into the
electrical socket ensure the following:
• The appliance is earthed and the plug is compliant with
the law.
• The socket can withstand the maximum power of the
appliance, which is indicated on the data plate located on
the bottom left side of the fridge (e.g. 150 W).
• The voltage must be in the range between the values
indicated on the data plate located on the bottom left
side (e.g. 220-240V).
• The socket is compatible with the plug of the appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it (
see Assistance
). Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power supply
cable and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only (see Assistance).
! The manufacturer declines any liability should these
safety measures not be observed.
Your appliance is supplied with a 13amp fused plug that
can be plugged into a 13amp socket for immediate use.
Before using the appliance please read the instructions
below.
WARNING:
THIS APPLIANCE MUST BE EARTHED.
Replacing fuse covers:
When replacing a faulty fuse, a 13amp ASTA approved
fuse to BS 1362 should always be used and the fuse
cover re-fitted.
If the fuse cover is lost, the plug must not be used until
a replacement is obtained.
Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of the
correct colour as indicated by the coloured marking or the
colour that is embossed in words on the base of the plug.
Changing the plug:
Removing the plug
If your appliance has a non-rewireable moulded plug
and you should wish to remove it to add a longer cable
or to re-route the mains cable through partitions, units
etc. please ensure that either:
- The plug is replaced by a fused 13amp re-
wireable plug bearing the BSI mark of
approval.
or
- The mains cable is wired directly into a
13amp cable outlet, controlled by a
switch (in compliance with BS 5733)
which is accessible without moving the
appliance.
Disposing of the plug
Cut off and dispose of the supplied plug if it does not fit
your socket. The cable should be cut as close as
possible to the moulded plug.
Remove the fuse.
WARNING:
To avoid a shock hazard do not insert the discarded
plug into a socket anywhere else.

Produkt Specifikationer

Mærke: Indesit
Kategori: Køling frysning
Model: taan 25

Har du brug for hjælp?

Hvis du har brug for hjælp til Indesit taan 25 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Køling frysning Indesit Manualer

Indesit

Indesit tan 25 v Manual

7 Juli 2024
Indesit

Indesit san 300 s Manual

7 Juli 2024
Indesit

Indesit ra 24 leu Manual

6 Juli 2024
Indesit

Indesit TAN 5NX Manual

6 Juli 2024
Indesit

Indesit r 24 s eu Manual

6 Juli 2024
Indesit

Indesit ta 2 i is Manual

6 Juli 2024
Indesit

Indesit ca 138 Manual

6 Juli 2024
Indesit

Indesit t 3 sp Manual

6 Juli 2024
Indesit

Indesit in c 310 g ai Manual

5 Juli 2024
Indesit

Indesit BAAN3344NF Manual

5 Juli 2024

Køling frysning Manualer

Nyeste Køling frysning Manualer

Liebherr

Liebherr KBgw 3864 Premium BioFresh Manual

15 Januar 2025
Liebherr

Liebherr UK1414 Manual

15 Januar 2025
Liebherr

Liebherr GWK 211 Manual

15 Januar 2025
Inventum

Inventum IVR0881S Manual

15 Januar 2025
Miele

Miele kt 2211 Manual

15 Januar 2025
Bauknecht

Bauknecht GKIE3883 Manual

15 Januar 2025
Atag

Atag ka 210 d Manual

15 Januar 2025
Liebherr

Liebherr ICUNS 3314 Manual

15 Januar 2025
Whirlpool

Whirlpool arc 0500 Manual

15 Januar 2025
Candy

Candy CV 200 Manual

15 Januar 2025