InfaSecure Matilda A35 Manual


Læs gratis den danske manual til InfaSecure Matilda A35 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om InfaSecure Matilda A35, eller vil du spørge andre brugere om produktet?

Side 1/4
Matilda
bed guard
INSTRUCTIONS
MODEL# A35
IMPORTANT: Please read instructions carefully.
Keep these instructions for future reference. Read the
entire instruction booklet before assembling and installing
this product. If you sell or give away this product, make
sure you give this instruction booklet to the new owner
P.O. Box 487, Emu Plains NSW 2750
Service No: 02 4728 8090
WARNING
1. For use with children from18 months to 5 years of age. This bed rail is to be used only when the child is able
to climb in and out of bed unaided.
2. This bed rail does not ensure the same level of safety as a child's cot.
3. Only use mattresses with the following measurements: minimum size 90x190cm ,maximum size 155x190cm
and min. thickness 10cm and max. 20cm.
4. Do not use when the height of the bedding is greater than 60cm. Never use on a bunk bed or any other bed
that does not correspond to the instructions.
5. To avoid risk of injury, carefully proceed acording to the instructions when assembling, installing and
using this bed rail.
6. It should be checked periodically that the bed rail is always properly fitted and secure in place, and the
locking mechanisms on the bed rail are securely fixed.
This bed guard complies with BS7972: 2001 + A1: 2009
OPERATING INSTRUCTIONS
ASSEMBLY PARTS
1. Make sure no component
is missing prior to assembly.
TO ASSEMBLE
(A) Left Vertical Side Rail
(B) Right Vertical Side Rail
(C) L-Shaped Top Rail
(D) L-Shaped Top Rail
(E) Right L-Shaped Foot Rail
(F) Left L-Shaped Foot Rail
(G) Straight Bottom Rail
(H) Straight Bottom Rail
(with sleeve)
(I) Fabric/Mesh Panel
(J) Safety Belts & Anchors
6.1
3 4
Lock button
Lock button hole 5
(E) (J)
(F)
(I)
(B)
(C)(D)
(G)(H)
(A)
2. Depress the lock buttons and
connect the Vertical Side Rails (A) &
(B), to L-shaped Top Rails (C) & (D).
3. Slide the mesh panel (I) onto
top rail as shown. Gather the
mesh fabric until the top rail end
is uncovered.
4. Connect the top two rails (C) and
(D) by aligning the two straight ends.
Depress the lock button, move and
turn the two top rails by alligning the
two straight rails into place.
5. Pull and ease the mesh panel to
cover the bed rail smoothly and flatly.
6.1 Insert the L-shaped foot rail (E)
into the fabric sleeve, as shown,
depress the two lock buttons, and
connect with Vertical Right Side Rail
(A). The locking buttons will automat-
ically spring outwards with a ‘click’
when correctly seated into the
receiving socket [6.1].
6.2 Repeat the same operation to
connect the opposite side foot rail (F)
through the mesh sleeve, and into the
Left Vertical Rail (B) [6.2]. Connect-
ing plastic parts need to be in the
same direction.
6.2


Produkt Specifikationer

Mærke: InfaSecure
Kategori: Ikke kategoriseret
Model: Matilda A35

Har du brug for hjælp?

Hvis du har brug for hjælp til InfaSecure Matilda A35 stil et spørgsmål nedenfor, og andre brugere vil svare dig