Infinity Outrigger Manual

Infinity Højttaler Outrigger

Læs gratis den danske manual til Infinity Outrigger (6 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 84 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 42.5 anmeldelser. Har du et spørgsmål om Infinity Outrigger, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

OWNER’S MANUAL

OUTDOOR

SPEAKERS

UNPACKING

1. Carefully unpack the speakers. If you suspect damage from

transit, report it immediately to your dealer and/or delivery

service. Keep the shipping carton and packing materials for

future use.

2. Verify that the package includes the following items:

– (2) Outrigger Speakers

– (2) Mounting Brackets

– (2) Paint Masks

– (1) Owner’s Manual

PLACEMENT

Although Outrigger Outdoor Speakers are weather-resistant, they

are not weatherproof. We recommending placing or mounting

them in a protected location, such as under the eaves of a roof or

on a porch.

For the best stereo effect, separate your Outrigger speakers by

at least seven to ten feet. Use the built-in pedestal for placement

on a table or other surface (see Figure 1). Experiment with

different placement to find the most pleasing effect for your

system. Placing your speakers near a wall or other surface will

increase bass output.

For vertical or horizontal mounting on a wall, use the enclosed

mounting bracket and hardware (see Figures 2 and 3). Locate a

stud for secure mounting. Use heavy-duty screws with long

threads (not included) so there is an adequate number of threads

holding the speaker/bracket to the wall. Test the mounting thor-

oughly before final installation. Rotate the logo (on the grille) to

match the mounting position.

NOTE: After determining placement position, you may wish to

paint each speaker (see next section).

rotate

logo

OUTRIGGER

(Front View)

FIGURE 1. Use the built-in pedestal for placement of an

Outrigger speaker on a table or other surface. Note logo orientation.

OUTRIGGER

(Rear View)

MOUNTING

BRACKET

Wood Screws

(fasten to

wall stud)

KNOB

(1 of 2)

FIGURE 3. Horizontal wall mounting of an Outrigger speaker.

If desired, tilt the speaker up or down before tightening knobs.

OUTRIGGER

(Rear View)

MOUNTING

BRACKET

Wood Screws

(fasten to

wall stud)

KNOB

(1 of 2)

FIGURE 2. Vertical wall mounting of an Outrigger speaker.

If desired, tilt the speaker left or right before tightening knobs.

Produkt Specifikationer

Mærke:	Infinity
Kategori:	Højttaler
Model:	Outrigger

Har du brug for hjælp?

Hvis du har brug for hjælp til Infinity Outrigger stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Infinity Manualer

Infinity ERS 420 Manual

23 Juli 2025

Infinity FUZE 100 Manual

23 Juli 2025

Infinity SM Video Manual

23 Juli 2025

Infinity 2000 II Manual

23 Juli 2025

Infinity Column WTLC Manual

23 Juli 2025

Infinity Compositions P-FR Manual

23 Juli 2025

Infinity Reference RS 2000.1 Manual

23 Juli 2025

Infinity Reference 40 Manual

22 Juli 2025

Infinity Kappa 5.1 Manual

22 Juli 2025

Infinity Alpha 10 Manual

22 Juli 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Adam T7V Manual

12 September 2025

Klipsch Flexus SURR 100 Manual

12 September 2025

Klipsch Detroit Manual

12 September 2025

Adam A3X Manual

12 September 2025

Adam A7X Manual

12 September 2025

Focal 1000 IW6 Manual

12 September 2025

QSC SC-423C Manual

11 September 2025

QSC AcousticDesign AD-S282H Manual

11 September 2025

Monitor Audio Bronze 200 AV 5.1.2 Manual

11 September 2025

Focal 1000 IWLCR Utopia Manual

11 September 2025