Infinity Prelude MTS Tower Manual

Infinity Højttaler Prelude MTS Tower

Læs gratis den danske manual til Infinity Prelude MTS Tower (40 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Infinity Prelude MTS Tower, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/40
Owner’s Guide
PRELUDE™MTS
I
MPORTANT
S
AFETY
I
NSTRUCTIONS
1. Read Instructions.All the safety and operating
instructions should be read before the product
is operated.
2. Retain Instructions.The safety and operating
instructions should be retained for future reference.
3. Heed Warnings.All warnings on the product and in
the operating instructions should be adhered to.
4. Follow Instructions.All operating and use
instructions should be followed.
5. Cleaning. Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
6.Attachments. Do not use attachments not
recommended by the product manufacturer, as they
may cause hazards.
7.Water and Moisture. Do not use this product near
water – for example, near a bathtub, wash bowl,
kitchen sink or laundry tub; in a wet basement; or
near a swimming pool; and the like.
8.Accessories. Do not place this product on an
unstable cart, stand, tripod, bracket, or table.The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
product.Any mounting of the product should follow
the manufacturer’s instructions, and should use a
mounting accessory recommended by
the manufacturer.
9.A Product and Cart Combination
Should Be Moved with Care.
Quick stops, excessive force,
and uneven surfaces may
cause the product and cart
combination to overturn.
10.Ventilation. Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from over-
heating, and these openings must not be blocked or
covered.The openings should never be blocked by
placing the product on a bed, sofa, rug, or other
similar surface.This product should not be placed in
a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
11. Power Sources.This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of
power supply to your home, consult your product
dealer or local power company.
For products intended
to operate from battery power, or other sources,
refer to the operating instructions.
12. Grounding or Polarization.This product may be
equipped with a polarized alternating-current line
plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert
the plug fully into the outlet, try sing the plug. Ifrever
the plug should still fail to fit, contact
your electrician to replace your
obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
13. Power-Cord Protection. Power-
supply cords should be routed so
that they are not likely to be walked
on or pinched by items placed upon
or against them, paying particular
attention to cords at plugs, convenience receptacles,
and the point where they exit from the product.
14. Nonuse Periods.The power cord of the product
should be unplugged from the outlet when left
unused for long periods of time.
15. Outdoor Antenna Grounding. If an outside
antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges
and built-up static charges. Article 810 of the
National Electrical Code,ANSI/NFPA 70, provides
information with regard to proper grounding of the
mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and
requirements for the grounding electrode.See Figure A.
16. Lightning. For added protection for this product
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system.This will prevent damage to
the product due to lightning and power-line surges.
17. Power Lines.An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme
care should be taken to keep from touching such
power lines or circuits, as contact with them might
be fatal.
18. Overloading. Do not overload wall outlets,
extension cords, or integral convenience
receptacles, as this can result in a risk of fire or
electric shock.
19. Object and Liquid Entry. Never push objects of
any kind into this product through openings, as they
may touch dangerous voltage points or short-out
parts, which could result in a fire or electric shock.
Never spill liquid of any kind on the product.
20. Servicing. Do not attempt to service this product
yourself, as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
21. Damage Requiring Service. Unplug this product
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a. The power-supply cord or the plug has been
damaged; or
b. Objects have fallen onto, or liquid has been
spilled into, the product; or
c. The product has been exposed to rain or water; or
d. The product does not operate normally when
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an improper adjustment of other
controls may result in damage and will often require
extensive work by a qualified technician to restore
the product to its normal operation; or
e. The product has been dropped or damaged in any
way; or
f. The product exhibits a distinct change in
performance – this indicates a need for service.
22. Replacement Parts.When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
that have the same characteristics as the original
part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
23. Safety Check. Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product
is in proper operating condition.
24.Wall or Ceiling Mounting.The product should be
mounted to a wall or ceiling only as recommended
by the manufacturer.
25. Heat.The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat.
Antenna Lead-In Wire฀
฀
Ground Clamp฀
฀
Antenna Discharge Unit (NEC Section 810-20)฀
฀
Grounding Conductors (NEC Section 810-21)฀
฀
Electric Service Equipment฀
฀
Ground Clamps฀
฀
Power Service Grounding Electrode System฀
(NEC Art 250, Part H)
Figure A.
Example of Antenna Grounding as
per National Electrical Code,
ANSI/NFPA 70
Part No. JBLULB 6/96
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To prevent electric shock,
do not remove the grounding plug
on the power cord, or use any plug
or extension cord that does not have
a grounding plug provided.
Make certain that the
AC outlet is properly grounded.
Do not use an adapter plug
with this product.
The lightning ash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sucient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
ii PRELUDE MTS

Produkt Specifikationer

Mærke: Infinity
Kategori: Højttaler
Model: Prelude MTS Tower

Har du brug for hjælp?

Hvis du har brug for hjælp til Infinity Prelude MTS Tower stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler Infinity Manualer

Infinity

Infinity ERS 420 Manual

23 Juli 2025
Infinity

Infinity FUZE 100 Manual

23 Juli 2025
Infinity

Infinity SM Video Manual

23 Juli 2025
Infinity

Infinity 2000 II Manual

23 Juli 2025
Infinity

Infinity Column WTLC Manual

23 Juli 2025
Infinity

Infinity Compositions P-FR Manual

23 Juli 2025
Infinity

Infinity Reference RS 2000.1 Manual

23 Juli 2025
Infinity

Infinity Reference 40 Manual

22 Juli 2025
Infinity

Infinity Kappa 5.1 Manual

22 Juli 2025
Infinity

Infinity Alpha 10 Manual

22 Juli 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Adam

Adam T7V Manual

12 September 2025
Klipsch

Klipsch Flexus SURR 100 Manual

12 September 2025
Klipsch

Klipsch Detroit Manual

12 September 2025
Adam

Adam A3X Manual

12 September 2025
Adam

Adam A7X Manual

12 September 2025
Focal

Focal 1000 IW6 Manual

12 September 2025
QSC

QSC SC-423C Manual

11 September 2025
QSC

QSC AcousticDesign AD-S282H Manual

11 September 2025
Monitor Audio

Monitor Audio Bronze 200 AV 5.1.2 Manual

11 September 2025
Focal

Focal 1000 IWLCR Utopia Manual

11 September 2025