Inkbird ISC-027BW Manual

Inkbird Ikke kategoriseret ISC-027BW

Læs gratis den danske manual til Inkbird ISC-027BW (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Inkbird ISC-027BW, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
类型：折页
材质：80G书纸
尺寸：150mmX80mm
INKBIRD TECH.C.L.
support@inkbird.com
Factory address: 6th Floor, Building 713, Pengji Liantang Industrial
Area, NO.2 Pengxing Road, Luohu District, Shenzhen, China
Office address: Room 1803, Guowei Building, NO.68 Guowei Road,
Xianhu Community, Liantang, Luohu District, Shenzhen, China
ISC-027BW
01 Product Introduction
WIFI STATUS
Status Indicator Light:
Green light remains on Working; →
Red light remains on Stop working; →
Red light flashes Pause →
(After the cover opening function is turned on, the
device will automatically pause by detecting the opening
of the oven cover and restart by detecting the closing of
the oven cover.)
Action Button: Short press to stop/start working, Long
press to reset Wi-Fi connection.
Package Contents: 1x BBQ Controller; 3x Meat Probes;
1x Oven Probe; 1x USB Power Plug+Cable; 1x Oven
Adaptor.
Note: If you use Wi-Fi connection, the chart data will be
saved in the server. If you use Bluetooth connection, the
chart data will be saved in the device local storage (local
storage can store up to 3 days of data).
02 Specifications
Input Voltage: DC 5V,1A
Short Time Measurement Range : from 0℃ to 300℃(32
℉~572℉)
Continuous Monitoring Range: from 0℃ to 250℃(32
℉~482℉)
Probe Temperature Accuracy:
±0.5℃/±0.9℉ (maximum) form +25℃~+140℃ (77℉~284
℉)
±1.0℃/±1.8℉ (maximum) form 0℃~+185℃ (32℉~365℉)
±1.5℃/±2.7℉ (maximum) from 0℃~+250℃ (32℉~482℉)
±2.0℃/±3.6℉ (maximum) from 0℃~+300℃ (32℉~572℉)
Connection Methods: support Wi-Fi connection and
Bluetooth connection Requires 2.4GHz Wi-Fi (Support
IEEE 802.11b/g/n)
Maximum Bluetooth Connection Distance: 164ft (the
distance will be shorter if there are interferences)
Calibration Range: ±12℃/±12℉
Warranty: 1 year
03 App Connection
3.1 Download the INKBIRD App
Search the INKBIRD App from Google Play or App Store to
get it for free, or you can scan the QR code below to
download it directly.
Note:
1. Your iOS devices must be running iOS 10.0 or above to
download the app smoothly.
2. Your Android devices must be running Android 4.4 or
above to download the app smoothly.
3. The device supports a 2.4GHz Wi-Fi router only.
Scan QR code to download
INKBIRD App.
3.2 Registration
3.2.1 Open the app, select your Country/Region, enter
your email address, and a verification code will be sent
to you.
3.2.2 Enter the verification code to confirm your identity,
and the registration is complete.
3.2.3 Registering an account is necessary before using
the INKBIRD app for the first time.
3.3 Connect to Your Phone
3.3.1 Open the app and click “+” in the upper right
corner to select ISC-027BW to start the connection.
3.3.2 Plug into a USB power supply, power on properly,
and click Next Step to continue.
3.3.3 Select the Wi-Fi network to connect to, enter the
password, and click Next Step to continue.
3.3.4 Press and hold the action button on the device
until the Wi-Fi indicator flashes to enter the pairing
state, then click Next Step to continue.
3.3.5 Your phone will automatically enter the device
scan page. Once the device is found, click Next Step to
continue.
3.3.6 The device is automatically pairing with the
network.
3.3.7 Pairing is successful.
Note: If pairing fails, unplug the power supply and
restart the device, then repeat steps 3.3.1~3.3.6 to try
again.
04 Bluetooth Connection
After completing the above 3.1 App connection, when
there is no Wi-Fi network, the device will be automatical-
ly connected to your phone via Bluetooth. You can also
choose to connect via Bluetooth when adding the
device.
Note: Please turn on GPS on your Android phone as
Google Play requires it to work fully. Once the device is
successfully paired with your phone, you don’t need to
pair it again unless you change your phone.
4.1 Main Interface of the ISC-027BW Smoker
Controller on INKBIRD App
(4) Do not press probes or the metal wire too hard, it
may damage the the plastic film of the wire and lead to
short circuit.
(5) Please take off the silicon case before using the
probe.
07 Product Warranty
This item carries a 1-year warranty against defects in
either components or workmanship. During this period,
products that prove to be defective will, at the discretion
of INKBIRD, be either repaired or replaced without
charge.
08 FCC Requirement
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment. This device
complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 20cm between the radiator & your
body. This transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.
Settings
Current
Temperature
Fan Speed
Oven Target
Temperature
Fan Switch
Timer
Real-time Temp-
erature Graph
Oven Setting
Historical Temp-
erature Graph
05 Air Duct Installation
Note that the air duct is factory installed on the
controller by default.
Step1: First, insert the air duct into the slot as indicated
by the arrow.
Step2: Turn the air duct counterclockwise as indicated
by the arrow to tighten it.
Step3: Push the switch up as indicated by the arrow to
lock the duct tightly.
After locking, it shows as below.
06 Precautions
(1) The maximum temperature for short time measure-
ment is 300℃/572℉ and the maximum temperature for
long time measurement is 250℃/482℉, the probe and
the metal wire will be burned out if the temperature go
beyond the maximum number.
(2) Do not put probes or metal wire into fire or contact
the heating tube directly.
(3) Do not put probes or the metal wire into water, it may
lead to inaccurate measurements.
Teflon cable with shtainless
steel mesh
(Length: about 120cm/3.9ft)
Sensor
Non Water-poof
Smoker
Controller
ISC-027BW
WIFI STATUS
GRILL 1 2 3
Air Outlet
(Connection
point for oven
adaptor)
Action Button
Status Indicator LightWi-Fi Indicator Light
Probe Ports USB Power Input Port
GRILL 1 2 3
Please connect the USB power supply
and keep the device powered on.
Please press and hold the button
for 5 and 8 seconds to let the indicator
light enter the connection state.
The device is connecting to the network.
Please select the WiFi you want to link
and enter the password If you do not
have a password,you do not need to
enter it.
WiFi already connected
ISC-027BW
-1-
-2- -3- -5--4-
-6-
-7-
-9- -14--10- -11- -12- -13--8-

Produkt Specifikationer

Mærke: Inkbird
Kategori: Ikke kategoriseret
Model: ISC-027BW

Har du brug for hjælp?

Hvis du har brug for hjælp til Inkbird ISC-027BW stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Inkbird Manualer

Inkbird

Inkbird ISC-027BW Manual

3 Oktober 2025
Inkbird

Inkbird IBS-TH5-WiFi Manual

3 Oktober 2025
Inkbird

Inkbird IKT-031 Manual

3 Oktober 2025
Inkbird

Inkbird PTH-10C Manual

3 Oktober 2025
Inkbird

Inkbird IHC-200-WIFI Manual

30 September 2025
Inkbird

Inkbird TC816 Manual

28 September 2025
Inkbird

Inkbird INK-DH01 Manual

28 September 2025
Inkbird

Inkbird ICC-510 Manual

16 Juli 2025
Inkbird

Inkbird IIC-400-WIFI Manual

16 Juli 2025
Inkbird

Inkbird INK-CO2W Manual

15 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Deye

Deye SUN-70K-SG02HP3-AU-EM6 Manual

16 December 2025
Eurosound

Eurosound HDBT70RxP Manual

16 December 2025
Sabrent

Sabrent Rocket SB-DR5U-16GX2 Manual

16 December 2025
KStrong

KStrong UFS354002 Manual

16 December 2025
ALNO

ALNO MC4550 Manual

16 December 2025
SkyRC

SkyRC Toro TS120 Manual

16 December 2025
Schlage

Schlage L9050 Manual

16 December 2025
LG

LG DK2M Manual

16 December 2025
V-TAC

V-TAC VT-81005 Manual

16 December 2025
Deye

Deye SUN-12K-SG01LP1-AU-AM3 Manual

16 December 2025