1 Press the VOLUME/ ON/OFF knob to turn the radio on.
2 Slide AM FM to select either the FM or AM band. The current
station is shown on the screen for 10 seconds, then the clock displays.
Note: If you select the FM band, stretch out the FM antenna on the back of your
clock radio to improve FM reception.
3 Press ( TUNE – TUNE +) or ( ) repeatedly to nd the station you want.
Press and hold ( ) or ( ) TUNE – TUNE + to search for the next
4 Turn the VOLUME/ ON/OFF knob to raise or lower the volume.
Saving radio station presets
Your clock radio can store ten station presets for FM and AM stations (for
1 TUNE – TUNE + With the radio turned on, press ( ) or ( ) to search the
radio band (AM or FM) you want, then press and hold ( )
A preset number blinks. (The preset number will automatically
increase each time you set a preset, or you can press down or up
repeatedly to select the preset number you want).
Tip: Press and hold ( ) or ( ) for two seconds to adjust TUNE – TUNE +
the radio band more quickly.
2 Press ( ) MEMORY/PRESET briey to save the station to the preset
3 Repeat the above steps to save a next station.
Note: To automatically search and save radio stations, turn on the radio, then
press and hold ( ) MEMORY/PRESET for six seconds. This will automatically
search for, and save, 10 stations in the currently selected band (FM or AM).
Recalling preset stations
With the radio on, press ( ) MEMORY/PRESET repeatedly to select the
1 When listening to the radio, press ( ) SLEEP to set the sleep timer.
2 SLEEP Press ( ) to set the sleep timer for 90 min and press
repeatedly to choose a dierent time duration (60 min, 45 min, 30
min, 15 min, or OFF). The radio automatically turns o after the
specied time. You can also change the sleep timer duration when the
remaining time is displayed by pressing this button repeatedly.
3 To stop listening at any time, press the VOLUME/ ON/OFF knob to
Adjusting the LED brightness
Press the SNOOZE / DIMMER button repeatedly to adjust the display’s
MAINTAINING YOUR CLOCK RADIO
Use a soft, dry cloth to clean the exterior of your clock radio. For stubborn
stains, dampen the cloth with a weak solution of mild detergent and water,
Note: Do not use abrasive cloths, thinners, alcohol, or other chemical solvents,
because they may damage the nish or remove the panel lettering.
• DIMENSIONS (H × W × D): 2.8 × 6.7 × 2.1 in. (7× 17 × 5.3 cm)
• Net weight: 1.1 lbs (.5 kg)
• Power requirements: 120V AC at 60Hz
Range: FM - 87.5~107.9 MHz / AM - 520~1710 KHz
Presets: 20 for AM and FM
• Backup battery: AAA batteries (2)
• Make sure that the power adapter is connected securely and correctly to
• Make sure that the power outlet is working.
No sound from the speakers
• Turn the VOLUME/ ON/OFF knob clockwise to increase the volume.
• Make sure that the power adapter is connected securely and correctly to
• Make sure that your clock radio is turned on.
Static or noise when playing the radio
• Make sure that the station is tuned correctly and that the station has a
• For FM stations, extend or rotate the antenna wire to improve the
• Make sure that the volume level is not set too high.
• Make sure that the station is tuned correctly and that the station has
The clock radio gets warm after extended play at high volume
• This is normal. Turn down the volume to let the radio cool.
1. Read these instructions.
2. Keep these instructions.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Only use attachments/accessories specied by the manufacturer.
8. Unplug this apparatus during lightning storms or when unused for long periods of time.
9. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for help.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
For customer service, call 1-877-467-4289 (U.S. and Canada)
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2024 Best Buy. All rights reserved.
