Insignia NS-SDSK-BL Manual

Insignia Skrivebord NS-SDSK-BL

Læs gratis den danske manual til Insignia NS-SDSK-BL (2 sider) i kategorien Skrivebord. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Insignia NS-SDSK-BL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

QUICK SETUP GUIDE

Standing Desk

NS-SDSK-BL / NS-SDSK-AK

NS-SDSK-BL-C / NS-SDSK-AK-C

MAJOR PARTS LIST

SMALL PARTS LIST

No. Part Qty

A 2

B 4

C 8

D 1

M6 x16

ST4.2*19

M6×16

4 x 4

5 x 5

No. Part Qty

1 1

2 1

3 1

4 2

5 1

6 1

7 1

8 4

9 1

Tabletop

Left column

Right column

Feet

Power Plug

Adapter

Cable ties

Hand switch

× 8

× 2

5 × 5

4 × 4

× 4

4 × 4

Before using your new product, please read these instructions to prevent any damage.

PACKAGE CONTENTS

• Standing desk

• Small parts list

• Quick Setup Guide

FEATURES

• Easily adjusts to a comfortable height with a hand switch

• 19.7 in (50 cm) of height adjustment lets you use the desk while standing or sitting

• The desktop holds up to 110 lbs. (50 kg) and is suitable for a computer, printer, or

sewing machine (within the weight limit)

• Cable management for a clean look

• Choice of two colors, black or mahogany (both with black frame)

• Electric adjustment switch easily raises or lowers the desk height

• Steel frame with particleboard tabletop provides a stable work surface

Top view

INSTALLING THE LEGS

1 Place the desktop upside down on a carpet or protective cloth.

Note: Make sure that both legs are at their lowest setting

(turn the shaft in each leg to do this) before installation so

that the table will be level when assembled.

2 Insert the hexagonal shaft in the rst leg into the corresponding hole in

the desktop leg mount, then turn the leg until the screw holes line up and the

connecting cable on the top of the leg faces the in toward the motor.

3 Attach the leg to the desktop with four M6 × 16 screws, tightening them

rmly with the 4 × 4 Allen key.

4 Repeat the steps to attach the other leg 2 .

Note: See the section on “Installing the Adapter and Connecting the Cables” for cable

connections.

Adjustable pad

Hand switch

INSTALLING THE FEET

Attach the feet to the bottoms of the legs with four 6 × 16 screws each. Make

sure that the adjustable pads on the bottom of the feet face down and the long

portion of each foot faces forward (as shown).

INSTALLING THE SWITCH

Attach the switch to the bottom of the desktop with two ST4.2*19 screws.

Tighten the screws with the 5 × 5 Allen key. Make sure that the at side of the

switch is against the desktop and the UP and DOWN buttons are facing forward.

TWO PERSON

LIFT REQUIRED

Adapter cable

NS-SDSK-BL_-C_NS-SDSK-AK_-C_ 23-0347_QSG_V6_EN_Final.ai 1 5/12/2023 10:36:10 AM

V6 ENGLISH 23-0347

LEGAL NOTICES

FCC PART 15

This device complies with Part 15 of the FCC Rules.

Operation of this product is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply within the limits for a class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced technician for help.

FCC WARNING

Changes or modications not expressly approved by the party responsible for compliance with the FCC

Rules could void the user’s authority to operate this equipment.

ONEYEAR LIMITED WARRANTY

For complete warranty, visit www.insigniaproducts.com.

CONTACT INSIGNIA

1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its aliated companies

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

INSTALLING THE ADAPTER AND CONNECTING THE CABLES

1 Slide the adapter into the slot on the bottom of the desktop so that the female connector is on the left

(as shown) and the adapter cable is on the right (see detail).

2 Connect the cable from the switch to the adapter cable , then lock them together (see detail).

3 Plug the small connecter on the power cord into the female connector on the adapter (see detail).

4 Connect the adapter cable to the DC port. Connect the motor cable to the M1 port (see detail).

5 Attach the cables to the bottom of the desktop with the cable ties provided (see detail).

USING YOUR STANDING DESK

1 With another person to assist you, lift the desk from the oor and turn it upright.

2 Place the desk where you want it, on a rm, level oor.

3 Plug your desk into a power outlet.

4 Press the



to raise the desktop and press the



to lower the table top.

Note: Make sure that the table and surrounding area are clear from obstructions before moving the table up or down.

Anti-collision function:

Note: When the lifting system’s built-in sensor encounters resistance, the lifting system pauses, then reverses motion and

stops.

• Press and hold the



and



buttons together (longer than 5 seconds) to turn o or turn on the

anti-collision function.

SPECIFICATIONS

• Maximum weight: 110 lbs. (50 kg)

• Input voltage required: 100-240V ~ 50/60Hz

• Lowest position: 28.7 in. (73 cm)

• Highest position: 48.4 in. (123 cm)

• Dimensions (desktop size) (H×W×D): 47.2 × 23.6 × 0.7 in. (120 × 60 × 1.8 cm)

TROUBLESHOOTING

The tabletop will not raise or lower

• Make sure that all cables are securely connected.

• Make sure that the tabletop is not overloaded. The maximum weight should not exceed 110 lbs. (50 kg).

• Try again after 18 minutes.

• Contact your supplier or dealer.

IMPORTANT SAFETY INFORMATION

• You should only use your table when the temperature is between 32° ~ 104° F (0° ~ 40° C).

• The power adapter requires 100-240VAC ~ 50/60Hz.

• Do not expose the power adapter to moisture, or excessive dust. It may cause shock hazards.

• Operate the adapter in a well ventilated area. Maximum ambient temperature around the power adapter

must not exceed 104° F (40° C).

• Do not open the power adapter under any circumstances. The power adapter is not intended to be

repaired in case of failure or component defect. There are no internal serviceable parts.

• Discontinue use, if any of the following should occur:

• The adapter shuts down when it connects to the switch’s port. (LED turns o )

• The adapter's LED light blinks when the adapter is plugged into an AC power outlet.

• A cord or plug is damaged or frayed.

• Make sure to connect the adapter’s plug and switch’s port correctly.

• The socket shall be installed near the adapter and shall be easily accessible.

• Make sure that your table is correctly and completely assembled before you use it.

CAUTION: You should unplug the power cord before cleaning your table. Wipe the dust from the surface

with a slightly damp cloth. Do not use caustic or abrasive cleaners or any solvents (such as benzine or

gasoline) to clean your table.

CAUTION: Children should not be allowed to operate the table.

UP button

DOWN button

NS-SDSK-BL_-C_NS-SDSK-AK_-C_ 23-0347_QSG_V6_EN_Final.ai 2 5/12/2023 10:36:11 AM

Produkt Specifikationer

Mærke:	Insignia
Kategori:	Skrivebord
Model:	NS-SDSK-BL

Har du brug for hjælp?

Hvis du har brug for hjælp til Insignia NS-SDSK-BL stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skrivebord Insignia Manualer

Insignia NS-SDSK-AK Manual

30 September 2025

Insignia NS-SDSKB553 Manual

29 September 2025

Insignia NS-SDSK-BL Manual

29 September 2025

Skrivebord Manualer

Nyeste Skrivebord Manualer

MSI Cubi NUC AI 1UMG Manual

1 Oktober 2025

Zotac ZBOX RI531 PLUS Manual

21 September 2025

Zotac ZBOX ID62 Nano Manual

20 September 2025

Zotac ZBOX nano Manual

20 September 2025

Zotac ZBOX CI549 Nano Manual

20 September 2025

Zotac ZBOX nano ID64 Plus Manual

20 September 2025

MuxLab Mini-PC-1 Manual

17 September 2025

Ikea MALM 503.598.26 Manual

17 September 2025

Asus AiO M241 Manual

17 September 2025

Asus AiO M3200 Manual

17 September 2025