Invicta Jason Taylor 25304 Manual
Læs nedenfor 📖 manual på dansk for Invicta Jason Taylor 25304 (31 sider) i kategorien Ur. Denne guide var nyttig for 20 personer og blev bedømt med 3.7 stjerner i gennemsnit af 10.5 brugere
Side 1/31
INSTRUCT ON MANUALI AND WARRANTY
THANK YOU FOR CHOOSING AN I TNVIC A TIMEPIECE
Long ago, we set out to continue Invicta’s original 1837 mission – to offer
magnificent Swiss timepieces at modest prices. In doing so, we gave birth
to a movement in the watch industry that is turning the balance of power
over to the consumer.
We hope you enjoy your new timepiece and carefully read the easy-to-use
instructions pertaining to it. By doing so, you will help give it a long life and
keep it operating at the high quality standards by which it was crafted.
These timepieces have been tested for water resistance. In order to maintain
the water resistance, be sure to always close the crown tightly after setting.
We also recommend having your timepiece checked every year by a certified
watchmaker to ensure the gaskets are in proper condition. This will help to
assure the precise operation and longevity of the piece. Please refer to our
Service Center information on our web site www.invictawatch.com.
W T DOES THISHA INDICATE?
Many Invicta watches are equipped with features that go beyond the
telling of time and date. These functions are displayed on what are called
subdials, indicators, counters or zones. Your watch may have one or more
of these. Knowing them will be useful when identifying which instructions
pertain to your watch.
!
PLE NOTE . ASE Since dial designs and shapes vary, not all subdials
are perfectly round, or positioned in the same place.
4
WATCHES WITH TIME ONLY
Setting the imeT
1. Pull out the crown to position 1. The watch stops.
2. Turn the crown until the correct time appears.
3. Push the crown back into position 0. The watch will begin running again.
10
WATCHES WITH , D TIME DAY AN DATE
Setting the ay and ateTime, D D
1. Pull out the crown to position 1.
2. Turn the crown clockwise until you reach the correct day.
3. Turn the crown counter clockwise until you reach the correct date.
4. Pull out the crown to position 2.
5. Turn the crown until you reach the correct time.
6. Push the crown back into position 0. The watch will begin running again.
14
WATCHES WITH ALARM
Setting the imeReference T
Parallel to the current time, the reference time runs in the background: the
alarm time refers itself to this reference time. Thus, resetting the time also
requires the identical correction of the reference time.If the reference time
is not synchronized with the current time, this results in the alarm signal
being emitted at a different time than the set alarm time.
1. Pull out the crown to position 2 . The second hand stops. The display
changes from alarm time to reference time. To set your watch to the
exact
second, the crown must be pulled out when the second hand is
in position 0.
18
WATCHES WITH ALARM
Setting the Alarm
1. Press the push-button for at least 2 seconds. Until the small minute
hand jumps forward one minute and setting mode is activated.
Short pressing: Less than 1 second:
The reference time is moved forward by the minute.
Medium pressing: 1-2 seconds:
The reference time is moved forward by the hour.
Long pressing: Longer than 2 seconds:
The reference time is moved forward until the push-button is released.
2. Switch alarm O ON/ FF: Press the push-button briefly.
2 beeps: Alarm switched ON
1 beep: FFAlarm switched O
20
CHRONOGRAPHS
Setting the ime and ate . fterT D A a Battery Change
1. Pull out the crown to position 1. The watch continues to run.
2. Turn the crown until you reach yesterday’s date. If you are setting the
date between 9pm and 12pm, the date must be set to the following day as
dates set between these hours do not automatically change at midnight.
3. Pull out the crown to position 2. To set the time to the exact second,
it must be pulled out when the second hand is in position 0. The watch
stops.
4. Turn the crown until you reach the correct date.
5. Continue to turn the crown until you reach the correct time.
6. Push the crown back into position 0. To set the time to the exact second,
it must be pushed back into position 0 at the exact second.
24
CHRONOGRAPHS
Adjusting the Chronograph Hands to Zero Position
1. Pull out the crown to position 2. All three chronograph hands are in
their correct or incorrect zero position.
2. Keep push-button A and B depressed simultaneously for at least 2
seconds. The center stop-second rotates 360º and corrective mode is
activated.
Adjusting the center stop second
S Pingle step: ress push-button A 1 x short
C Pontinuous: ress push-button A 1 x long
26
CHRONOGRAPHS WITH BIG DATE DAYAND
Invicta is one of the first companies to use the Swiss-made Startech
5050.C, the world’s first big date and day chronograph with three eyes. It
features small seconds at 3 o’clock, tenths of a second at 6 o’clock, and
30 minutes and, in some, 12 hours at 9 o’clock.
32
Produkt Specifikationer
| Mærke: | Invicta |
| Kategori: | Ur |
| Model: | Jason Taylor 25304 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Invicta Jason Taylor 25304 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ur Invicta Manualer
11 Januar 2025
4 September 2024
4 September 2024
4 September 2024
25 August 2024
24 August 2024
24 August 2024
24 August 2024
21 August 2024
21 August 2024
Ur Manualer
- Ur Georg Jensen
- Ur Nedis
- Ur Tudor
- Ur Kalenji
- Ur Ikea
- Ur Perel
- Ur Kogan
- Ur Antelope Audio
- Ur Pulsar
- Ur Davis
- Ur Detomaso
- Ur Miyota
- Ur Puma
- Ur Slazenger
- Ur Ticwatch
Nyeste Ur Manualer
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025