Jabsco Par Max 4 Manual

Jabsco Vandpumpe Par Max 4

Læs gratis den danske manual til Jabsco Par Max 4 (4 sider) i kategorien Vandpumpe. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Jabsco Par Max 4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

4 – 4.3 GPM (16.3 LPM)

FEATURES

• Self-Priming to 10 ft. (3 m)

• Run Dry Without Damage

• Smooth Flow

• Four Piston, Diaphragm Pump

• Powerful Heavy Duty Motor with Thermal Overload

Protection

• Snap-in Ports

• Waterproof Coating

• Pressure Switch with Rubber Boot (31700-Series)

• Meets USCG Regulation 183.410 and EN ISO 8846

MARINE (Ignition Protection Standards)

• Meets EN 50081-1 Electro-magnetic Compatibility

31705-Series Complies with EN ISO 8849 MARINE

Electric Bilge Pump

GENERAL APPLICATIONS

31700-Series – High velocity pump for anchor and

general deck washdown. Compact size with matched hi-

output spray nozzle. Corrosion resistant coated motor

and sealed pressure switch for fresh or salt water use.

Also great for continuous duty operation in livewell

application at full flow.

31705-Series – For bilge/livewell/G.P. applications that do

not require a pressure switch. Low amp draw, can run dry.

Oil resistant parts allow pumping of diesel fuel. SPECIFICATIONS

• Pump Body – Glass Filled Polypropylene

• Pump Design – Multi-Chamber Diaphragm

• Suction Lift – Self Priming to 10 ft. (3 m)

• Ports – 3/4" (19 mm) Hose Barb or 1/2" (13 mm)

• Motor – Permanent Magnet

• Shipping Weight – Weight - 6.5 lb (3.0 kg)

WARNING!

VARIATIONS

MODELS

31700-0092

31700-0392

31700-0094

31700-0394

31705-0092

31705-0094

APPLICATION

WASHDOWN/BAITWELL

BILGE/LIVEWELL/G.P.

GPM/LPM

4.3/16.3

VOLTS

12 Vdc

24 Vdc

12 Vdc

24 Vdc

SHUT-OFF

psi (bar)

50 (3.5)

N/A

AMP DRAW

@ 10 psi

@ 40 psi

N/A

FUSE

BREAKER*

* Customer supplied, not included with pump.

Explosion hazard. Do not pump

gasoline, solvents, thinners or other

flammable liquids. To do so can

cause an explosion resulting in

injury or death.

Models 31700, 31705-Series

DIMENSIONAL DRAWINGS — INCHES (mm)

PAR - MAX SERIES

WASHDOWN/BAITWELL — 31700-SERIES

BILGE/LIVEWELL/GENERAL PURPOSE — 31705-SERIES

Bilge/Livewell

Washdown/Baitwell

3.25

(82)

(127)

7.73

(196)

4.19

(106)

3.50

(90)

INSTALLATIONS

MOUNTING

The Jabsco pumps are self-priming and may be located

above or below the fresh water supply in a dry location.

To vertically mount these units, it is best to do so with the

motor on top. This will prevent water dripping on motor in

the event of a leak. Place pump on a solid surface and

secure with the four mounting screws being careful not to

compress the rubber grommets which act as shock

absorbers.

PLUMBING

IT IS RECOMMENDED THAT MARINE GRADE

REINFORCED HOSE BE USED FOR ALL PLUMBING

WITH THESE MODELS OF JABSCO PUMPS.

31700-Series – Washdown/Livewell (Fig. 1)

Install the PumpgardTM strainer (provided) to the hose

from the water source (thru-hull seacock or water tank).

Connect the Pumpgard strainer to the pump inlet port.

Connect the pump discharge to a 3-way valve or T (if live-

well has a shutoff valve). Connect to livewell and to hose

bib. From hose bib use new spray nozzle.

31700-Series – w/Rule®Dual Port (Fig. 2)

Install Rule®dual port pump to seacock. Connect hose

from dual port pump to livewell/baitwell tank (see Fig. 2).

Connect washdown hose from dual port pump to

PumpguardTM strainer, connect to pump inlet port.

Connect hose from pump outlet to pressure nozzle.

31705-Series – Bilge/Livewell (Fig. 3)

The 31705-Series pumps can be used as either a bilge

pump or as a bait tank/livewell pump. Connect from bilge

to PumpgardTM strainer (provided) to pump to discharge.

Or from thru-hull seacock to PumpgardTM to pump to

tank.

Note – PumpgardTM strainers should be mounted in the

most accessible place possible to make periodic cleaning

of the screen easier.

WIRING

In an easily accessible location, install a switch to control

electricity to the pump. The switch should have an amp

rating equal to or greater than the fuse size specified for

the pump. Turn the pump off when not used for extended

periods or when the tank is empty.

The electrical circuit should be protected with an over-

current protection device in the positive lead. See chart

for proper size. The pump circuit should not include any

other electrical loads. The open terminal on the pressure

switch is positive. Black wire from the motor is negative.

Select wire size from chart below. Use total length of wire

from the battery to pump and return. Chart allows for 3%

voltage drop. If in doubt, use next larger wire size.

If you are not familiar with applicable electrical stan-

dards, have the unit installed by a qualified electri-

cian.

After installation, check the voltage at the pump motor.

Voltage should be checked when pump is operating. Full

voltage must be available at the pump motor at all times.

OPERATION

1. Open seacock (washdown or livewell applications).

2. Open hose bib and/or spray nozzle (31700-Series) or

make sure discharge thru-hull is clear (31705-Series).

3. Turn on pump.

4. 31700-Series. Close spray nozzle/hose bib when water

runs free of air. Pump is now ready for automatic

demand operation.

5. 31705-Series. Pumps do not have a pressure switch

and are usually switched manually.

6. For prolonged operation, pump must operate at full

open flow.

CAUTION!

Motor case will get hot.

Prolonged contact during

operation may cause a burn.

Fig. 1

31700-Series

Fig. 2

31700-Series w/Rule®Dual Port

Fig. 3

31705-Series

Quick Easy Installation

Versatile Snap-in Ports

Total length

in feet

12 Volt

24 Volt

0-20

(0-6 m)

#14 AWG

(2.5 mm2)

#16 AWG

(1.5 mm2)

20-35

(6-11 m)

#12 AWG

(4 mm2)

#14 AWG

(2.5 mm2)

35-55

(11-17 m)

#10 AWG

(6 mm2)

#12 AWG

(4 mm2)

Bilge Pump

Pumpguard

Inlet Strainer

Produkt Specifikationer

Mærke:	Jabsco
Kategori:	Vandpumpe
Model:	Par Max 4

Har du brug for hjælp?

Hvis du har brug for hjælp til Jabsco Par Max 4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vandpumpe Jabsco Manualer

Jabsco Par Max 4 Manual

23 Juli 2024

Vandpumpe Manualer

Nyeste Vandpumpe Manualer

DAB NOVA Salt W Manual

4 Oktober 2025

DAB Genix VT 030 Manual

4 Oktober 2025

DAB Verty Nova 200 Manual

3 Oktober 2025

DAB E.Swim 150 M Manual

3 Oktober 2025

DAB Esybox Mini 3 Manual

3 Oktober 2025

DAB JetInox 112 M Manual

3 Oktober 2025

Neptun NSP-E 95 Inox Manual

2 Oktober 2025

Neptun NHA-E 120 Manual

2 Oktober 2025

Neptun NBP-E 16 Manual

1 Oktober 2025

Draper Expert 64065 Manual

1 Oktober 2025