Jacuzzi ST09826 Manual

Jacuzzi Ikke kategoriseret ST09826

Læs gratis den danske manual til Jacuzzi ST09826 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Jacuzzi ST09826, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

HANDHELD SHOWERHEAD INSTALLATION GUIDE

Jacuzzi Item / #ST07826-BN / ST07827-CP

#ST08826-BN / ST08827-CP

#ST09826-BN / ST09827-CP

#ST10826-BN / ST10827-CP

Questions, problems, missing parts? Before returning to

your retailer, call our customer service department at

1- - -4002, 9 a.m. - 5 p.m., EST, Monday - Friday.800 288

ATTACH YOUR RECEIIPT HERE

Purchase Date _______________

CAUTION-TIPS FOR REMOVAL OF OLD

SHOWERHEAD:

Always turn off water supply before removing existing

showerhead or replacing any part. Open the valve

handle to relieve water pressure and ensure that water

is completely shut o.

CARE INSTRUCTIONS:

To preserve the finish of your showerhead, apply

non-abrasive wax. Any cleaners should be rinsed o

immediately. Do not use abrasive cleaners on the

showerhead.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate, or install the

products.

WARNING:

•Follow the installation instructions carefully. Proper installation is the installer’s responsibility.

•Failure to follow correct installation procedures can result in the showerhead being loose,

which can result in serious injury.

CAUTION:

•Check local building codes before beginning installation to ensure compliance.

Tools Required for Assembly

Thread Sealant Tape

Wrench

Meets ASME A112.18.1M Requirements 1.8gpm (6.8L/min) Max, 1.35gpm (5.1L/min) Min at 45psi

PART DESCRIPTION

QUANTITY

A Showerhead 1

Hand Shower Holder

C 1Hose 60”

TROUBLESHOOTING

Install the hex nut of the hose to the

hand shower holder. Carefully use a

wrench on the thread ats Do not .

overtighten.

PART NO: ST12000 Rev A

Remove the old showerhead

from the existing shower arm by

turning the ball joint

counterclockwise.

Apply thread sealant tape in a

clockwise direction to the open

end of the shower arm.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

Uneven water ow

Water nozzles are blocked with mineral

build

-up or debris

Gently rub easy clean nozzles with ngertip to remove

any mineral build

-up or debris

Low water ow

Mineral build

-up or debris have clogged

the screen in the ball joint

Rinse the mineral build

-up or debris from the screen

ST09XXX

ST07XXX

ST08XXX

ST10XXX

PACKAGED CONTENT

Install the hand shower holder.

Flush the lines without the

showerhead to remove debris

before installing showerhead.

Install the handheld showerhead to

the conical nut of the hose. Carefully

hand tighten on the thread ats. Do

not overtighten.

Produkt Specifikationer

Mærke:	Jacuzzi
Kategori:	Ikke kategoriseret
Model:	ST09826

Har du brug for hjælp?

Hvis du har brug for hjælp til Jacuzzi ST09826 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Jacuzzi Manualer

Jacuzzi ST09826 Manual

18 November 2025

Jacuzzi ST05826 Manual

12 November 2025

Jacuzzi ST06826 Manual

12 November 2025

Jacuzzi ST07826 Manual

11 November 2025

Jacuzzi Barrea PK00845 Manual

4 April 2025

Jacuzzi Barrea PK01845 Manual

4 April 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vevor BY10650Z Manual

18 November 2025

Vevor JQ-3860P Manual

18 November 2025

Vevor 80E01B Manual

18 November 2025

Vevor BA-303010-MB Manual

18 November 2025

DVDO -Matrix-22 Manual

18 November 2025

Vevor B44-F Manual

18 November 2025

Vevor WNS-4 Manual

18 November 2025

Zotac ZBOX CI667 nano Manual

18 November 2025

Vevor LQX-110039 Manual

18 November 2025

Vevor SH-LS-025 Manual

18 November 2025