James QX1020A Manual

James Subwoofer QX1020A

Læs gratis den danske manual til James QX1020A (2 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 91 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 46 anmeldelser. Har du et spørgsmål om James QX1020A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

INSTALLATION GUIDE

PBF Pre-construction Board Installation guide

PBF (FLUSH) PRE-CONSTRUCTION BOARD INSTALLATION GUIDE

Before installing the PBF pre-construction board,

we recommend securing two horizontal studs, at

PBF board height, between the vertical studs of

the chosen installation location to add additional

support.

Measure the PBF board and make an outline of the

board on a new panel of sheet rock.

After this has been done, ensure that the

board is level before fully securing it to the

wall studs.

Lay the frame panel of sheet rock over the PBF

board and fasten the frame to studs of the wall.

5Cut along the traced path to make a frame for

the pre-construction board.

Once the board has been properly leveled, fasten

the PBF board to the vertical and horizontal studs.

Produkt Specifikationer

Mærke:	James
Kategori:	Subwoofer
Model:	QX1020A
Produktfarve:	Hvid
Materiale:	Aluminium
Impedens:	4 ohm (Ω)
Subwoofer RMS-effekt:	1000 W
Subwoofer type:	Aktiv subwoofer
Subwoofer frekvensomrpde:	27 - 150 Hz
Subwoofer, følsomhed:	92 dB
Subwoofer dybde:	104.77 mm
Subwoofer bredde:	363.73 mm
Subwoofer højde:	722.88 mm