JBL GX-A602 Manual

JBL Bilforstærkere GX-A602

Læs gratis den danske manual til JBL GX-A602 (28 sider) i kategorien Bilforstærkere. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om JBL GX-A602, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

GX-A604/GX-A602/GX-A3001

power ampliﬁ er

OWNER'S MANUAL

INTRODUCTION

THANK YOU for purchasing a JBL® GX-series amplifier. So we can better serve you should you require warranty service, please retain your original

sales receipt and register your amplifier online at www.jbl.com.

INCLUDED ITEMS

GX-Series Amplifier (x 1)

Speaker-level input harness

(GX-A602, GX-A3001 x 1)

(GX-A604 x 2)

LOCATION AND MOUNTING

Although these instructions explain how to install GX-series amplifiers in a general sense, they do not show specific installation methods that may be

required for your particular vehicle. If you do not have the necessary tools or experience, do not attempt the installation yourself. Instead, please ask

your authorized JBL car audio dealer about professional installation.

INSTALLATION WARNINGS AND TIPS

IMPORTANT: Disconnect the vehicle’s negative (–) battery terminal before beginning the installation.

• Always wear protective eyewear when using tools.

• Check clearances on both sides of a planned mounting surface. Be sure that screws or wires will not puncture brake lines, fuel lines or wiring

harnesses, and that wire routing will not interfere with the safe operation of the vehicle.

• When making electrical connections, make sure they are secure and properly insulated.

• If you must replace any of the amplifier's fuses, be sure to use the same type of fuse and current rating as that of the original.