JBL W12GTi MkII Manual

JBL Subwoofer W12GTi MkII

Læs gratis den danske manual til JBL W12GTi MkII (8 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om JBL W12GTi MkII, eller vil du spørge andre brugere om produktet?

Side 1/8
THANK YOU
for choosing a JBL®GTi Series subwoofer.
GTi subwoofers are designed to
provide maximum sound output in a
variety of enclosure types while
maintaining the superb sound quality
associated with JBL. To ensure the best
subwoofer performance, we strongly
recommend that installation be entrusted to a
qualified professional. Although these instructions
explain how to install a GTi Series subwoofer in
a cgeneral sense, they don’t show the specifi
installation procedures that may be required for
your particular vehicle. If you feel you don’t have
the necessary tools or experience, don’t attempt
the installation yourself; rather, ask your authorized
JBL dealer about professional-installation options.
GTi SERIES
W10GTi MkII
W12GTi MkII
W15GTi MkII
automotive
subwoofer
owner’s manual
2
INSTALLATION WARNINGS AND TIPS
WARNING
Playing loud music in an automobile can
hinder your ability to hear traffic, as well
as permanently damage your hearing.
We recommend listening at low levels
while driving. JBL accepts no liability for
hearing loss, bodily injury or property
damage resulting from use or misuse of
this product.
YOUR CAR AND BASS
REPRODUCTION
Depending on the size of the vehicle’s
interior listening space, reproduced
frequencies below 80Hz may be boosted
by nearly 12dB per octave as frequency
decreases. This effect, commonly known
as transfer function, or cabin gain, plays
an important role in defining the in-car
frequency response of your subwoofer.
It is displayed graphically, along with
freespace response, on the enclosed
data sheet for your GTi subwoofer.
POWER-HANDLING
LIMITATIONS
The power-handling capacity of any
subwoofer is related to the excursion
limit of its suspension and its ability to
dissipate heat. A speaker reaches its
excursion-limited power-handling
capacity when its suspension is
stretched to its limit. The excursion
curve shown on the Enclosure Design
Sheet (included with your woofer)
displays cone excursion at the input
power level required to drive the woofer
to maximum linear excursion (Xmax).
The input power shown may be used
as instantaneous input only.
Thermal power handling is determined
by the amount of heat that may be
dissipated by the driver’s voice coil.
The power-handling rating assigned
to your GTi Series subwoofer is its
thermal-power-handling rating. This
rating assumes a clean (unclipped)
signal. A clipped waveform has much
higher average power, due to the longer
duty cycle at the top and bottom of the
waveform; it will heat the woofer’s voice
coil faster than a clean signal and may
damage the voice coil. A square wave
has a 100% duty cycle and is extremely
dangerous for any speaker. Audible
distortion in the output of your woofer
is an indication that your amplifier may
be clipping, which could damage your
speakers over time.


Produkt Specifikationer

Mærke: JBL
Kategori: Subwoofer
Model: W12GTi MkII

Har du brug for hjælp?

Hvis du har brug for hjælp til JBL W12GTi MkII stil et spørgsmål nedenfor, og andre brugere vil svare dig