JennAir JMC2427LM Manual


Læs gratis den danske manual til JennAir JMC2427LM (72 sider) i kategorien Mikrobølgeovn. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 4 anmeldelser. Har du et spørgsmål om JennAir JMC2427LM, eller vil du spørge andre brugere om produktet?

Side 1/72
FOR SERVICE TECHNICIANS USE ONLY
Tech Manual Do not remove or destroy
W11324887A 08/20
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
DANGER
Electrical Shock Hazard
Only authorized technicians should
perform diagnostic voltage measurements.
After performing voltage measurements,
disconnect power before servicing.
Failure to follow these instructions can
result in death or electrical shock.
Voltage Measurement Safety Information
When performing live voltage measurements, you must do the following:
Verify the controls are in the off position so that the appliance does not start when energized.
Allow enough space to perform the voltage measurements without obstructions.
Keep other people a safe distance away from the appliance to prevent potential injury.
Always use the proper testing equipment.
After voltage measurements, always disconnect power before servicing.
FOR SERVICE TECHNICIANS USE ONLY
2
IMPORTANT: Electrostatic Discharge (ESD) Sensitive Electronics
ESD problems are present erywhere ESD may damage or weaken the electronic control assemblyev . . The new control
assembly may appear to work well after repair is finished, but failure may occur at a later date due to ESD stress.
Use an antistatic wrist strap. Connect wrist strap to green ground connection point or unpainted metal in the
appliance
-OR-
Touch your finger repeatedly to a green ground connection point or unpainted metal in the appliance.
Before removing the part from its package, touch the antistatic bag to a green ground connection point or
unpainted metal in the appliance.
Avoid touching electronic parts or terminal contacts; handle electronic control assembly by edges only.
When repackaging failed electronic control assembly in antistatic bag, observe above instructions.


Produkt Specifikationer

Mærke: JennAir
Kategori: Mikrobølgeovn
Model: JMC2427LM

Har du brug for hjælp?

Hvis du har brug for hjælp til JennAir JMC2427LM stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrobølgeovn JennAir Manualer

Mikrobølgeovn Manualer

Nyeste Mikrobølgeovn Manualer