JILONG JL017230NPF Manual

JILONG Swimmingpool over jorden JL017230NPF

Læs gratis den danske manual til JILONG JL017230NPF (11 sider) i kategorien Swimmingpool over jorden. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om JILONG JL017230NPF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

Thank you for choosing the products manufactured by Jilong Company. Before

using, please read the manual carefully and keep it with original package for future

reference.

△,!WARNING!

Warning. Never leave your child unattended – drowning hazard.

Warning. Only for domestic use. Only for outdoor. Children can

drown in very small amounts of water. Empty the pool when not in

use. Do not install the paddling pool over concrete, asphalt or any

other hard surface. Toy intended to be assembled by an adult. Adult

supervision required. Keep away from fire. Do not use in water.

1. CONTENT：1pc product 2. Instruction Manual 3. Repair patch

2. USING INSTRUCTION:

1） Place the product on a level surface at least 2m from any structure or obstruction

such as a fence,garage,house,overhanging branches,laundry lines or electrical wire.

2） Recommend back towards the sun when playing.

3） Take out the product from package and unfold it on the ground, lay flat.

4） It is recommended that you use only a hand or foot pump for inflation.

5） Caution: Do not use the high-pressure air to inflate! Do not over-inflate!

6） Slowly Inflate all parts and accessories until full one by one, close and press all

valves tightly after inflation to firm and supportive.

7） Locate and close the drain valve on the bottom of pool tightly, fill pool with water till

the capacity reach to 3/4 roughly.

7) Finally, enjoy the happy hours.

SPP-10-E

CVP-13-E

(V3)

User’s Manual

Inflatable Pool

8) After use, open the drain valve on the bottom of pool to drain water. Open and

squeeze base of valves to release air, or insert a slim object such as a deflation tube to

hold valve inner stopper open. Being careful not to puncture your product or force air out

of product. Allow air to escape slowly and naturally.

9) Modifications made by the consumer to the original activity toy shall be carried out

according to the instructions of the manufacturer. Please do not use the rope or net that

the minimum diameter less than 2mm or the maximum length more than 30cm.

3. STORAGE AND MAINTAIN

1）It is necessary to carry out checks and maintenance of the main parts (crossbeams,

suspensions, anchors etc.) at regular intervals, if these checks are not carried out the

activity toy could overturn or otherwise become a hazard. Replace defective parts in

accordance with the manufacturer's instructions.

2）It is of particular importance to carry out the maintenance operations and follow and

respect the supplied recommandations at the beginning of each season as well as at

regular intervals during the usage season.

3) Change the water of paddling pools frequently(particularly in hot weather) or when

noticeably contaminated,unclean water is harmful to the user’s health.

4) Clean the product with clear water, then leave it in shady and cool place for airing,

fold it into original package and place it indoor for next use. Caution: Do not use the

alkali or acid detergent to clean product! Do not leave product exposed under

sunlight directly because it will shorten the using-life of product.

4. REPAIR PATCH INSTRUCTION (Small pinhole and small puncture leaks can be

repaired with the included repair patch)

a) Locate the leak place.

b) Deflate and drain the water.

c) Clean the area surrounding the leakage and wipe up all water from the surface.

d) Take out the repair patch, cut it into required shape and size, which should be litter

larger than the leaking area, put the patch on leaking area and press firmly.

e) You can use it again after 24 hours drying of the repaired position.

If the damage is bigger than 1” (2.5cm), we recommend using a Silicone or rubber

based glue for repair. Please read warning statement on glue prior to use.

Shanghai Jilong Plastic Products Co. Ltd.

No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China

Tel: +86-21-58942200 E-mail: info@jilong.com Web: www.jilong.com

Produkt Specifikationer

Mærke:	JILONG
Kategori:	Swimmingpool over jorden
Model:	JL017230NPF
Højde:	350 mm
Vægt:	1580 g
Produktfarve:	Green, White
Pakkedybde:	10 mm
Pakkebredde:	310 mm
Pakkehøjde:	210 mm
Antal:	1
Pakketype:	Kasse
Materiale:	PVC
Certificering:	CE
Produkter pr. palle:	180 stk
Diameter:	1220 mm
Kapacitet:	230 L
Oprindelsesland:	Kina
Form:	Rund
Anbefalet alder (min.):	3 År
Pakkevolumen:	43000 cm³
Farvelægning:	Monokromatisk
Intrastat kode:	95069990
Type af swimmingpool:	Oppustelig pool
Montagetid:	20 min.
Mindste ordremængde:	6 stk
Reparationslap inkluderet:	Ja
Slangetilslutning:	Ja
Inflate type:	Delvis