JL Audio MVi-DRCADAPT Manual

JL Audio Fjernbetjening MVi-DRCADAPT

Læs gratis den danske manual til JL Audio MVi-DRCADAPT (4 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 16 anmeldelser. Har du et spørgsmål om JL Audio MVi-DRCADAPT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Rotary DRC Adaptor for MVi Amplifiers

(Use with rotary-style Digital Remote Controllers only.)

MVi-DRCADAPT

Product Description:

The MVi-DRCADAPT permits the direct connection of a JL Audio rotary-style Digital

Remote Controller (DRC) to a MVi amplifier via its JLid-COMM Port.

Notes: This product is not compatible with mono MV amplifiers or the MVi-HUB.

This product is not needed for connection of M-DRC-50 push-button controller.

What is Included:

(1) MVi-DRCADAPT

(1) Mounting Clip

(2) Mounting Screws

Placement Considerations:

The MVi-DRCADAPT should be installed near the connected MVi amplifier,

where its JLid status LED can be viewed.

Installation:

1. Plug the cable end of the MVi-DRCADAPT into the JLid-COMM port of the MVi amplifier.

2. Install a compatible DRC controller (sold separately) per its instructions and connect its

cable end to the RJ45 jack of the MVi-DRCADAPT.

Mounting Clip Installation:

A mounting clip is included to secure the MVi-DRCADAPT module. Use the supplied screws

to fasten the mounting clip to a flat surface. Once the mounting clip is installed, attach the

MVi-DRCADAPT module by pressing one side of its notched center section against the

inside of one of the arms of the mounting clip. Continue pressing inward until both arms of

the mounting clip snap around the notched center section of the MVi-DRCADAPT module.

Ensure that the JLid Status LED is facing outward and visible. To remove, grasp the module’s

body and pull while rotating away from the mounting clip.

JLid Status LED:

The MVi-DRCADAPT module is equipped with a multi-color status LED.

Refer to the table below for detailed info:

MVi-DRCADAPT LED Color Status

Green JLid™ detection in progress

Blue Successful connection of a compatible DRC

Yellow Unrecognized JLid ™ device

(retry attempts result in ashing Yellow)

Yellow-Green (alternating) Faulty JLid™ device

None (JLid-COMM Port LED of the

connected MVi amplier ashes Red)

Short circuit condition of JLid ™ connection

(MVi-DRCADAPT turns OFF)

Produkt Specifikationer

Mærke:	JL Audio
Kategori:	Fjernbetjening
Model:	MVi-DRCADAPT

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio MVi-DRCADAPT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fjernbetjening JL Audio Manualer

JL Audio MMA-1-HTML Manual

27 Juli 2025

JL Audio MMR-25W Manual

31 August 2024

JL Audio HD-RLC Manual

30 August 2024

JL Audio M-RBC-1 Manual

22 Juli 2024

JL Audio MMR-10W Manual

20 Juli 2024

JL Audio VXi-HUB Manual

10 April 2024

JL Audio VXi-BTC Manual

29 August 2023

JL Audio MMR-20-BE Manual

4 August 2023

JL Audio RBC-1 Manual

12 Juli 2023

JL Audio CL-RLC Manual

26 November 2022

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Philips Prestigo SRU8010 Manual

15 August 2025

Philips CP0118 Manual

14 August 2025

Renkforce RF-PLP-202 Manual

14 August 2025

Renkforce RF-5253052 Manual

14 August 2025

Renkforce RF-WRC-300 Manual

14 August 2025

Renkforce RF-PLP-200 Manual

14 August 2025

One For All EazyClean URC 9290 Manual

13 August 2025

One For All URC 2781 Manual

13 August 2025

One For All Digital 5 URC 7557 Manual

12 August 2025

Chamberlain CH382C Manual

12 August 2025