Jøtul GF 200 DV IPI Manual

Jøtul Ikke kategoriseret GF 200 DV IPI

Læs gratis den danske manual til Jøtul GF 200 DV IPI (36 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Jøtul GF 200 DV IPI, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/36

Jøtul GF 200 DV IPI

Direct Vent Gas Stove

Installation and

Operation Instructions

– Do not store or use gasoline or other

ammable vapors and liquids in the

vicinity of this or any other appliance.

– WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do

not use any phone in your building.

• Immediately call your gas supplier

from a neighbor’s phone. Follow the gas

supplier’s instructions.

• If you cannot reach your gas supplier, call

the re department.

– Installation and service must be performed

by a qualied installer, service agency or

the gas supplier.

– In the Commonwealth of Massachusetts,

a carbon monoxide (CO) detector shall

be installed in the same room as the

appliance.

WARNING: If the information in these

instructions is not followed exactly, a re or

explosion may result causing property damage,

personal injury or loss of life.

This appliance may be installed in an aftermarket,

permanently located, manufactured home or

mobile home, where not prohibited by local codes.

This appliance is only for use with the types of gas

indicated on the rating plate. A conversion kit is

supplied with the appliance.

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

























139587_10 GF 200 DV IPI April 2018

THIS OWNER’S MANUAL PROVIDES INFORMATION TO

ENSURE SAFE INSTALLATION AND EFFICIENT, DEPENDABLE

OPERATION OF YOUR FIREPLACE INSERT. PLEASE READ

THESE INSTRUCTIONS IN THEIR ENTIRETY AND MAKE THEM

AVAILABLE TO ANYONE USING OR SERVICING THIS GAS

INSERT.

DO NOT ATTEMPT TO ALTER OR MODIFY THE CONSTRUCTION

OF THIS APPLIANCE OR ITS COMPONENTS. ANY

MODIFICATION OR ALTERATION WILL VOID THE WARRANTY,

CERTIFICATION AND LISTING OF THIS APPLIANCE.

THIS HEATER MUST BE INSTALLED AND MAINTAINED BY A

QUALIFIED SERVICE AGENCY.

Suggested Tools for

Installation and Service

• External regulator (for Propane only)

• Piping which complies with local code

• Manual shut-o valve -

T-Handle required in Massachusetts

• Sediment trap - if required by code

• Tee joint

• Pipe wrench

• Pipe sealant

• 10 mm open end wrench

• 1/2”, 7/16” open end wrench

• Phillips head screwdriver

• Flat head screwdriver

• 1/4” nut driver

• Gloves

• Safety glasses

• Torx T-20 screwdriver

• Tin snips

Installation Requirements for the

Commonwealth of Massachusetts

THIS PRODUCT MUST BE INSTALLED BY A LICENSED MASTER

OR JOURNEYMAN PLUMBER OR GASFITTER WHEN INSTALLED

IN THE COMMONWEALTH OF MASSACHUSETTS.

1. If there is not one already present, on each oor level

where there are bedroom(s), a carbon monoxide detector

and alarm shall be placed in the living area outside the

bedroom(s). The carbon monoxide detector shall comply

with NFPA 720 (2005 Edition).

2. A carbon monoxide detector shall:

a) Be located in the room that houses the appliance or

equipment;

b) Be either hard-wired or battery powered or both; and

c) Shall comply with NFPA 720 (2005 Edition).

3. A Product-approved vent terminal must be used, and

if applicable, a Product-approved air intake must be

used. Installation shall be in strict compliance with the

manufacturer’s instructions. A copy of the installation

instructions must remain with the appliance or equipment

at the completion of the installation.

INITIAL FIRING PROCESS -

Heat-curing the Paint and Log Set

This appliance has been painted with the

highest quality coating used in the hearth

industry. Manufacturers have selected this

product because it has been proven durable,

colorfast, and beautiful at temperatures up to

1200°F/650°C. Although the paint has been

air-dried at the factory, it must be heat-cured

in order to maximize its coating properties and

durability. This process occurs during initial

ring of the appliance and will generate odor

and some visible smoke.

We recommend you do the following BEFORE

operating the appliance for the rst time:

1. Ventilate: Open doors and windows and use

a fan to circulate fresh air throughout the

room.

2. Vacate: The fumes are non-toxic, but can

be uncomfortable for babies, small children,

pregnant women, elderly, pets, or anyone

having breathing diculties.

Gas Appliance Curing Process

1. After the installer has conrmed proper

burner function at all heat levels, the

homeowner should operate the appliance at

a low setting for 2-4 hours, followed by 2-4

hours operation at a high setting.

2. O-gassing by paint and log set ceramic

material may leave a white, powdery deposit

on the inside surface of the glass panel.

This residue must be removed using a non-

abrasive household glass cleaner or warm

water to prevent permanent etching of the

glass.

DO NOT USE AMMONIA-BASED CLEANERS.

See Section 8, OPERATION for detailed, day-to-

day operating procedures.

Natural Gas / 67.21%

Propane / 71.05%

Jøtul GF 200 DV IPI

Based on CSA P.4.1-15

Produkt Specifikationer

Mærke:	Jøtul
Kategori:	Ikke kategoriseret
Model:	GF 200 DV IPI

Har du brug for hjælp?

Hvis du har brug for hjælp til Jøtul GF 200 DV IPI stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Jøtul Manualer

Jøtul GF 200 DV IPI Manual

6 September 2024

Jøtul GF 200 DV II Manual

6 September 2024

Jøtul GF 200 DV Manual

6 September 2024

Jøtul GF3 BV Allagash Manual

6 September 2024

Jøtul GF600 DV II Firelight Manual

6 September 2024

Jøtul GF3 DVII Allagash Manual

6 September 2024

Jøtul F 602 CB Manual

6 September 2024

Jøtul F 600 CB Firelight Manual

6 September 2024

Jøtul C 550 Rockland CB Manual

6 September 2024

Jøtul C 450 Kennebec CF Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025

Navman MiVue 745 Manual

1 August 2025

Hitachi WR22SE Manual

1 August 2025

Synology M2D20 Manual

1 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Buffalo GC882 Manual

1 August 2025