Joy-It ARD-CNC-Kit2 Manual

Joy-It Ikke kategoriseret ARD-CNC-Kit2

Læs gratis den danske manual til Joy-It ARD-CNC-Kit2 (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Joy-It ARD-CNC-Kit2, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/10
CONTROLLER BOARD CNC
4x DRV8825 motor driver for Arduino Uno
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net
. GENERAL INFORMATION & SAFETY INSTRUCTIONS
. SAFETY INSTRUCTIONS
Dear customer
thank you for choosing our product. In the following
we will show you what you need to bear in mind when commissioning and
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
This set lays the foundation for installing a customised CNC router. The
controller board is suitable for use with the Arduino Uno or Arduino Uno
compatible boards and can be operated with 12 to 35 V as required.
Up to 4 axes can be controlled with the supplied DRV8825 motor drivers.
The expansion board is easy to control as it is 100% 0.9 GRBL
compatible.
As this expansion board can be used to control potentially dangerous machi-
nes, please observe the following safety instructions:
Never reach into the machining area while the machine is running.
Do not remove any chips by hand. Use tools such as
brushes, hand brushes or compressed air for this purpose. Tools and
workpieces must never be changed while the tool spindle
is running. Ensure that the workpieces are suiciently
secured so that the workpiece can never be moved out
of position due to the resulting load, e.g. when drilling or
milling. Never leave the machine running unattended! Always
keep a safe distance from the running machine.
Only use the ARD-CNC-Kit2 in dry environments.
When using components from other manufacturers, please find out about
their safety regulations and observe them.
We are not liable for damage caused by improper use.

Produkt Specifikationer

Mærke: Joy-It
Kategori: Ikke kategoriseret
Model: ARD-CNC-Kit2

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It ARD-CNC-Kit2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Joy-It Manualer

Joy-It

Joy-It LK-Base-RB Manual

30 Juli 2025
Joy-It

Joy-It ARD-NanoV4-3V Manual

29 Juli 2025
Joy-It

Joy-It ARD-NanoV4-3V-MC Manual

29 Juli 2025
Joy-It

Joy-It JT-PS1440-C-PRO Manual

18 Juni 2025
Joy-It

Joy-It ARD-CNC-Kit2 Manual

7 April 2025
Joy-It

Joy-It SBC-MD-DRV8825 Manual

7 April 2025
Joy-It

Joy-It SBC-NodeMCU-ESP32-C Manual

30 Januar 2025
Joy-It

Joy-It COM-RM01 Manual

30 Januar 2025
Joy-It

Joy-It RB-Heatsink5 Manual

28 Januar 2025
Joy-It

Joy-It RB-CaseP5-07B Manual

28 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MY500XT Manual

1 August 2025
Navman

Navman FOCUS150 GPS Manual

1 August 2025
Scheppach

Scheppach TW1000 Manual

1 August 2025
Navman

Navman MiVue 750 WIFI Manual

1 August 2025
Navman

Navman MiVue Drive FHD Manual

1 August 2025
Midea

Midea MEC64 Manual

1 August 2025
Navman

Navman MY50T Manual

1 August 2025
Navman

Navman M100 Manual

1 August 2025
Navman

Navman MiVue 770 SAFETY Manual

1 August 2025
Navman

Navman MiVue 790 Manual

1 August 2025