Joy-It JT3.5TR Manual

Joy-It Legetøj JT3.5TR

Læs gratis den danske manual til Joy-It JT3.5TR (9 sider) i kategorien Legetøj. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Joy-It JT3.5TR, eller vil du spørge andre brugere om produktet?

Side 1/9
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
3.2" / 3.5" TOUCH DISPLAY-
For the pinning on the Raspberry Pi
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact
us
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. OVERVIEW
3.2" Display 3.5" Display
Controller XPT2046
Resolution 320 x 240 480 x 320
Colors 65.536
3. CONNECTION
Put the 3.2" / 3.5" TFT Display on the Raspberry Pi so that the first 26 -
pins of the GPIO pin header are plugged in. Aer that, the
backgroundlight of the display is turned on.
4. INSTALLATION OF THE SOFTWARE
Install the TFT image on your SD card with a program like the - - Win32 Disk- -
Imager. You can download the images via the following links:
For the 3.2" display, you find the downloads .here
For the 3.5" display, you find the downloads .here


Produkt Specifikationer

Mærke: Joy-It
Kategori: Legetøj
Model: JT3.5TR

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It JT3.5TR stil et spørgsmål nedenfor, og andre brugere vil svare dig