Joy-It RB-ADC01 Manual


Læs gratis den danske manual til Joy-It RB-ADC01 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Joy-It RB-ADC01, eller vil du spørge andre brugere om produktet?

Side 1/5
ANALOG-DIGITAL CONVERTER FOR RASPBERRY PI
RB-ADC01
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
3. I2C-ADRESSE
This analog-digital converter is able to change the I2C address by means
of jumpers. For this you can change the following jumper to use
0x49,0x4A or 0x4B. By default the address is set to 0x48.
4. NTC
There is an NTC placed on the converter. This NTC is connected to AN0. In
the following example, this can be used to measure the temperature.
However, if you want to use AN0, you should remove the jumper, which is
marked in the following picture. Furthermore, you must additionally re-
move the calculation of the temperature from the code example, other-
wise an error message will occur.
2. CONNECTION
The analog-digital converter is connected as shown in the following pic-
ture.


Produkt Specifikationer

Mærke: Joy-It
Kategori: Ikke kategoriseret
Model: RB-ADC01

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It RB-ADC01 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Joy-It Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer