Joy-It rb-camera-ww2 Manual

Joy-It Kamera rb-camera-ww2

Læs gratis den danske manual til Joy-It rb-camera-ww2 (5 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Joy-It rb-camera-ww2, eller vil du spørge andre brugere om produktet?

Side 1/5
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
5 MP WIDEANGLE CAMERA FOR RASPBERRY PI
rb-camera-WW2
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us .
When using it, it is particularly important to observe the personal rights
and the right to informational self-determination which is applied in
Germany .
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
2. CONNECTION
Connect the camera module as shown in the picture with the CSI
interface of your Raspberry Pi. Pay attention to the orientation of the cab-
le. The connection via the CSI interface is suicient, so that no further
connection is required.
3. INSTALLATION OF THE SYSTEM
If you are already using the latest Raspbian soware on your Raspberry
Pi, you can skip this step and immediately proceed to the next step.
Otherwise, please follow the instructions below.
Please install the latest Raspbian soware on your SD card. You can
download it here.
With a suitable program (e.g. Win 32 Disk Imager) you can transfer the
image to your SD card.
Now select the downloaded image, as well as the microSD card you want
to be written on and write with the button
Write
.


Produkt Specifikationer

Mærke: Joy-It
Kategori: Kamera
Model: rb-camera-ww2

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It rb-camera-ww2 stil et spørgsmål nedenfor, og andre brugere vil svare dig