Joy-It SBC-ESP01-RM Manual

Joy-It Ikke kategoriseret SBC-ESP01-RM

Læs gratis den danske manual til Joy-It SBC-ESP01-RM (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 91 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 46 anmeldelser. Har du et spørgsmål om Joy-It SBC-ESP01-RM, eller vil du spørge andre brugere om produktet?

Side 1/7
ESP-01S RELAY MODULE
Remotely controllable relay module
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
To use the ESP-01S relay module, you must first program the ESP-01S
supplied on the product.
For this, we recommend programming the ESP-01S with the ESP8266
PROG from 3.
2. PROGRAMMING THE ESP-01S RELAY MODULE
First, the Arduino development environment must be prepared for use
with the ESP8266.
To do this, the following URL is entered in the global settings of the pro-
gram as an additional board administrator URL:
https://arduino.esp8266.com/stable/package_esp8266com_index.json
Next, an additional board library must be installed. Open the board ma-
nager and install the ESP8266 library.
Please note that your Arduino development environment must be
restarted if the board library is not displayed.


Produkt Specifikationer

Mærke: Joy-It
Kategori: Ikke kategoriseret
Model: SBC-ESP01-RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It SBC-ESP01-RM stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Joy-It Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer