Joy-It SBC-LCD01 Manual


Læs gratis den danske manual til Joy-It SBC-LCD01 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Joy-It SBC-LCD01, eller vil du spørge andre brugere om produktet?

Side 1/7
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
1,3 " HD-IPS-TFT-LCD DISPLAY
SBC-LCD01
1. GENERAL INFORMATION
Dear customer,
thank you for choosing our product. In the following, we will show you
how to use this device.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
Note that before you can use the display, you must solder the pin
header!
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
2. USAGE WITH THE NODEMCU
1. Connection
2. Code example
The SBC-LCD01 has a logic level of 3.3V, making a NodeMCU recom-
mended for this application. To use a NodeMCU with the Arduino IDE,
you must first add the board. To do this click on
File
Preferences
. There you add the following link
Additional board
administrator URLs
.
Now you can download the library in the Arduino IDE. There you go to the
library manager, which you can find under
Sketch
Include library
Manage libraries
. There you install Adafruit ST7735 and ST7789
Library and the Adafruit GFX Library using the search bar. Now you can
download a sample code here, where an image is displayed on the
screen.
Make sure that you select the NodeMCU as board also under
Tools
, as
well as the correct port.
Please note, if you want to upload the code, you have to keep the
flash button pressed!
NodeMCU LCD
D1
(GPIO 5)
DC
D2
(GPIO 4)
RES
D5
(SCLK)
SCL
D7
(MOSI)
SDA
G GND
3V VCC
http://arduino.esp8266.com/stable/package_esp8266com_index.json


Produkt Specifikationer

Mærke: Joy-It
Kategori: Ikke kategoriseret
Model: SBC-LCD01

Har du brug for hjælp?

Hvis du har brug for hjælp til Joy-It SBC-LCD01 stil et spørgsmål nedenfor, og andre brugere vil svare dig