JUNG PMK360 Manual

JUNG Bevægelsesdetektor PMK360

Læs gratis den danske manual til JUNG PMK360 (11 sider) i kategorien Bevægelsesdetektor. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om JUNG PMK360, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/11
Presence detector compact
Light Management
Presence detector compact
Art. No. : PMK 360 WW
Presence detector compact
Art. No. : PMK 360 AL
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Do not press on the lens. Device can be damaged.
The device is not suitable for use as a burglar alarm or other alarm.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Brightness sensor
(2) Sensor window
(3) Decor ring
(4) Connection box
(5) LED
(6) Adjuster , run-on timetime
(7) Adjuster , Brightnesslux
3 Function
Intended use
1/11
82552623
J0082552623 04.09.2015
- Automatic switching of lighting depending on the heat motion and ambient brightness.
- Ceiling installation, surface-mounted
Product characteristics
- 2-point light control
- Run-on time and brightness value settable
- Test operation for checking the detection area
- Push-on cover for limiting the detection area
- Parallel connection of multiple presence detectors possible
- Manual switch-on and switch-off possible with installation button
Automatic operation
The presence detector detects heat motions of people, animals and objects.
- The light is switched on if someone or something enters the monitored detection area and
the brightness is below the set level.
- The light remains switched on as long as there are motions present in the detection area
and the brightness is not below the set level.
- The light is switched off if no more movement is detected in the detection area and the run-
on time has elapsed.
- The light is switched off if the brightness exceeds twice the set value for longer than
10 minutes.
iThe minimum switch-off brightness is 400 lux, even if a lower value is set.
Function of presence detectors that are connected in parallel
Presence detectors that are connected in parallel operate largely independently of each other.
Run-on time and brightness are set separately on each presence detector. A soon as a
presence detector switches on, this is detected by the other presence detectors. They switch on
when there is motion in their detection area, unless the brightness in their detection area is
double the set value.
As a general rule, the following applies: the light is switched on when the first presence detector
switches on, and is switched off when the last presence detector switches off.
Behaviour in case of a mains failure
- Less than 0.2 seconds: the old switching position is restored after mains return.
- Longer than 0.2 seconds: a self-test is performed after mains return. This takes approx.
30 seconds. The light is switched on during the self-test; operation via extensions is not
possible.
4 Operation
Switching on the light
An installation button is connected.
oPress the installation button.
The light is switched on for at least 2 minutes.
iIf motions are detected, the light remains on after the 2 minutes have elapsed. The run-on
time is set to the time specified on the adjuster.
iIf the adjuster is set to , then the light remains switched on as long as thetime test
installation button is pressed. The light remains switched off for approx. 1 second after
release.
Switching the light off
It is possible to switch the automatic function off in a targeted fashion, e.g. in order to darken a
room.
An installation button is connected.
Light is switched on
oPress the installation button.
2/11
82552623
J0082552623 04.09.2015
Light Management
Presence detector compact

Produkt Specifikationer

Mærke: JUNG
Kategori: Bevægelsesdetektor
Model: PMK360

Har du brug for hjælp?

Hvis du har brug for hjælp til JUNG PMK360 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Bevægelsesdetektor JUNG Manualer

JUNG

JUNG BTLC17181244 Manual

6 September 2024
JUNG

JUNG BTLC17182250 Manual

6 September 2024
JUNG

JUNG BTLC17181255 Manual

6 September 2024
JUNG

JUNG BTLC17182259 Manual

6 September 2024
JUNG

JUNG BTLC17181224 Manual

6 September 2024
JUNG

JUNG BTLC17181219 Manual

6 September 2024
JUNG

JUNG BTLC17181217 Manual

6 September 2024
JUNG

JUNG BTLC17181213 Manual

6 September 2024
JUNG

JUNG BTLC17181233 Manual

6 September 2024
JUNG

JUNG BTLC17182235 Manual

6 September 2024

Bevægelsesdetektor Manualer

Nyeste Bevægelsesdetektor Manualer

Hikvision

Hikvision DS-TDSB00-EKH Manual

28 Juli 2025
Blaupunkt

Blaupunkt IR-S1 Manual

28 Juli 2025
Panasonic

Panasonic ST4 Manual

25 Juli 2025
Steinel

Steinel L 331 S Manual

25 Juli 2025
Steinel

Steinel MD-8 ECO COM1 Manual

25 Juli 2025
Steinel

Steinel PD-24 ECO COM1 Manual

25 Juli 2025
Steinel

Steinel IS 3360 COM1 Manual

25 Juli 2025
Steinel

Steinel PD-8 ECO COM1 Manual

25 Juli 2025
Steinel

Steinel IS 3180 COM1 Manual

25 Juli 2025
Vimar

Vimar 19485.M Manual

24 Juli 2025