Juniper MX960 3D Manual

Juniper Router MX960 3D

Læs gratis den danske manual til Juniper MX960 3D (408 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Juniper MX960 3D, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/408
MX960 3D Universal Edge Router
Hardware Guide
Published: 2014-03-26
Copyright © 2014, Juniper Networks, Inc.
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
MX960 3D Universal Edge Router Hardware Guide
Copyright © 2014, Juniper Networks, Inc.
All rights reserved.
Revision History
March 2014—Added new topics for SCBE2. Added the upgrade procedure for the SCBE2.
August 2013—Added new topics for CLI hardware terminology and port and interface numbering.
May 2013—Added topic ref under Related Topics in AC Power Supply Description that relates to the High-Capacity AC PEM DIP switch
settings. Added the "show chassis power" command and snippet output under Maintaining the MX960 Power Supplies to show the
High-Capacity AC PEM.
April 2013—Added interface port mapping for DPC, MPC, and FPC. Also added notation in the power section for high-capacity power supplies
need an additional power cord when implementing.
December 2011—Added topics on high-capacity AC power cord lock installation and left-angle power cord installation.
September 2011—Added the upgrade procedure for the Enhanced MX SCB and information for the new SCB.
July 2011—Updated AC and DC power specifications.
April 2011—Added high-capacity power supply installation information.
March 2011—Updated Routing Engine content.
December 2010—Added RE-S-1800 content.
September 2010—Updated high-capacity power information.
August 2010—Updated site wiring guidelines.
April 2010—Added installation and removal procedures for dual-wide MICs.
July 2009—Updated product names. Updated information about securing power cable lugs.
10 April 2009—530-022470-01. Revision 5. Added information about the MX Series FPC2. Added warning about removing transceivers.
6 February 2009—530-022470-01. Revision 4. Added information about MX Series FPCs and PICs. Revised sections into modular topics
for easier customer access.
13 October 2008—530-022470-01. Revision 3. Corrected the speed and location of the ETHERNET port, and the connector on the CONSOLE
and AUX ports.
15 May 2008—530-022470-01. Revision 2. Corrected the procedures to replace DC power cables, and to install Routing Engine cables.
Updated the power requirements and specifications and the specification for acoustic noise. Added high-availability information, and a
schedule for replacing the fan filters.
1 October 2007—530-022470-01. Revision 1. Added Extended Cable Manager, updated system power component numbers, added additional
information for installing power supplies.
29 June 2007—530-017573-01. Revision 2. Updated Cable and Wire Specifications for Routing Engine Management and Alarm Interfaces
table, changed DPC outputs, updated Cable Manager, updated craft interface serial label.
12 March 2007—530-017573-01. Revision 1. Initial Release-Final Draft
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the
year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks
software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at
Copyright © 2014, Juniper Networks, Inc.ii

Produkt Specifikationer

Mærke: Juniper
Kategori: Router
Model: MX960 3D

Har du brug for hjælp?

Hvis du har brug for hjælp til Juniper MX960 3D stil et spørgsmål nedenfor, og andre brugere vil svare dig


Router Juniper Manualer

Juniper

Juniper MX960 3D Manual

4 Oktober 2025
Juniper

Juniper PTX10001 Manual

4 Oktober 2025
Juniper

Juniper ACX6160 Manual

4 Oktober 2025
Juniper

Juniper SRX300 Manual

4 Oktober 2025
Juniper

Juniper SRX345 Manual

4 Oktober 2025
Juniper

Juniper ACX6360 Manual

4 Oktober 2025
Juniper

Juniper MX204 Manual

4 Oktober 2025
Juniper

Juniper SRX320 Manual

4 Oktober 2025
Juniper

Juniper PTX10002 Manual

4 Oktober 2025
Juniper

Juniper MX480 Manual

4 Oktober 2025

Router Manualer

Nyeste Router Manualer

Arris

Arris SURFboard mAX W61 Manual

4 Oktober 2025
Milesight

Milesight UF51 Manual

4 Oktober 2025
Arris

Arris SURFboard SBR-AC3200P Manual

4 Oktober 2025
Arris

Arris SURFboard SBG6700-AC Manual

3 Oktober 2025
Arris

Arris Touchstone DG1670A Manual

3 Oktober 2025
Arris

Arris SURFboard DG3260A/NA Manual

3 Oktober 2025
Arris

Arris SURFboard SBG6580 Manual

3 Oktober 2025
Arris

Arris SURFboard DOCSIS 3.1 Manual

3 Oktober 2025
Arris

Arris Touchstone DG6700C Manual

3 Oktober 2025
Arris

Arris SURFboard SBG6782-AC Manual

3 Oktober 2025