Kärcher WD 5 P V-25/5/22 Manual

Kärcher Støvsuger WD 5 P V-25/5/22

Læs gratis den danske manual til Kärcher WD 5 P V-25/5/22 (12 sider) i kategorien Støvsuger. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Kärcher WD 5 P V-25/5/22, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
© 2020 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model AJP100E Form No. SJ-AJP100E-880E-M
RRANDOM ORBIT BUFFER + POLISHER
ELECTRIC | 0.7 AMP | 6" | 3800 OPM
1
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Power Tool Safety
Warnings
m WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not followed, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not followed, could result in minor or moderate injury.
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions
– Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a Ground Fault Circuit Interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication – A moment of
inattention while operating power tools may result in
serious personal injury.
2. Use safety equipment. Always wear eye protection
– Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
3. Prevent unintentional starting. Ensure the switch is in
the o-position before connecting to power source,
picking up or carrying the tool. – Carrying power tools
with your nger on the switch or energizing power tools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
5. Do not overreach. Keep proper footing and balance at
all times – This enables better control of the power tool in
unexpected situations.
6. Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts – Loose clothes, jewelry or long hair can be caught
in moving parts.
2
7. Only use safety equipment that has been approved
by an appropriate standards agency – Unapproved
safety equipment may not provide adequate protection.
Eye protection must be ANSI-approved and breathing
protection must be NIOSH-approved for the specic
hazards in the work area.
8. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
9. Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
Power Tool Use + Care
1. Do not force the power tool. Use the correct power
tool for your application – The correct power tool will
do the job better and safer at the rate for which it was
designed.
2. Do not use the power tool if the switch does not turn
it on and o – Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
3. Disconnect the plug from the power source from the
power tool before making any adjustments, changing
accessories, or storing power tools – Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
4. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool – Power
tools are dangerous in the hands of untrained users.
5. Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may aect the power
tool’s operation. If damaged, have the power tool repaired
before use Many accidents are caused by poorly –
maintained power tools.
6. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
7. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. – Use of the power tool for operations
dierent from those intended could result in a hazardous
situation.
8. Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Service
Have your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
Electrical Safety
1. Ground fault circuit interrupter (GFCI) protection should
be provided on the circuit(s) or outlet(s) to be used for
this electric Buer + Polisher. Receptacles are available
having built-in GFCI protection and may be used for this
measure of safety.
2. Make sure that the mains voltage matches that listed on
the unit's rating label. Using the improper voltage can
damage the Buer + Polisher and injure the user.
3. To prevent electric shock, use only with an extension
cord suitable for indoor use only, such as SW-A, SOW-A,
STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A, or
SJTOW-A.
Before use, check that the extension cord is in good
condition. When using an extension cord, make sure to
use one heavy enough to carry the current your product
will draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
4. To prevent the appliance cord from disconnecting from the
extension cord during operation, make a knot with the two
cords as shown in Table 1.
m WARNING m
Electric shock may cause SEVERE INJURY or
DEATH. Heed these warnings:
• Do not allow any part of the electric Buer + Polisher
to make contact with water while it is in operation.
If the appliance becomes wet while turned o, wipe
dry before starting.
• Do not use an extension cord over 10 ft. The Buer +
Polisher comes equipped with a 11.8 in. power cable.
Combined cord length must not exceed 11 ft.
Any extension cord must be 18-gauge (or heavier) to
safely power the Buer + Polisher.
• Do not touch the appliance or its plug with wet hands
or while standing in water. Wearing rubber boots
oers some protection.
EXTENSION CORD CHART
Cord Length:
Min. Wire Gauge (A.W.G.):
10 ft (3 m)
18

Produkt Specifikationer

Mærke: Kärcher
Kategori: Støvsuger
Model: WD 5 P V-25/5/22

Har du brug for hjælp?

Hvis du har brug for hjælp til Kärcher WD 5 P V-25/5/22 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Støvsuger Kärcher Manualer

Kärcher

Kärcher NT 50/1 K Manual

27 Juli 2025
Kärcher

Kärcher NT 50/1 Mwf Manual

27 Juli 2025
Kärcher

Kärcher SGV 8/5 Classic Manual

27 Juli 2025
Kärcher

Kärcher WB 7 Plus Manual

26 Juli 2025
Kärcher

Kärcher KM 70/30 C Bp Manual

26 Juli 2025
Kärcher

Kärcher WD 4 P S Manual

26 Juli 2025
Kärcher

Kärcher WD 2 Plus V-15/6/18/C Manual

26 Juli 2025
Kärcher

Kärcher NT 30/1 Me Classic Manual

26 Juli 2025
Kärcher

Kärcher KM 70/25 C Bp Manual

26 Juli 2025
Kärcher

Kärcher NT 75/1 Me Manual

26 Juli 2025

Støvsuger Manualer

Nyeste Støvsuger Manualer

Bush

Bush V18P01EP29EU Manual

2 August 2025
Gorenje

Gorenje VC2324GPRA Manual

2 August 2025
Severin

Severin HV 7155 Manual

1 August 2025
Amica

Amica VM 3011 EOS Manual

1 August 2025
Amica

Amica Akman VM 4014 Manual

1 August 2025
Amica

Amica Viento VI 2021 Manual

1 August 2025
Eibenstock

Eibenstock WRS 50 Manual

1 August 2025
Grundig

Grundig VCW 4270 L Manual

1 August 2025
RYOBI

RYOBI VC-25HD Manual

1 August 2025
Grundig

Grundig VCC 6250 ECO Manual

1 August 2025