Kenton D-Sync Manual

Kenton Ikke kategoriseret D-Sync

Læs gratis den danske manual til Kenton D-Sync (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Kenton D-Sync, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
DDDD----SYNCSYNCSYNCSYNC
Bi-directional MIDI to DIN Sync Converter
Operating manual
2
Description
The D_SYNC has a MIDI Input and a MIDI Output for connecting to your MIDI
devices. The D_SYNC has an opto-coupled MIDI Input for optimum performance.
The D-Sync also has both a DIN Sync Input and a DIN Sync Output for connecting to
your sequencer and/or drum machine etc.
The D_SYNC is powered by a multi-region mains adaptor (supplied), so it doesn’t
need periodic battery changes to keep it working, enabling you to “fit and forget”.
If required, you can also power D-Sync from a USB port of your computer or USB
Hub.
Connecting
Plug the large plug end of the supplied USB lead into the supplied 5V power adaptor
and the other end into the D-Sync. Ensure the power adaptor is plugged in to the
mains and that the ACTIVE LED on the D_SYNC is on (steady green).
To convert MIDI to DIN Sync:
Connect the MIDI output of your keyboard(s) and/or computer to the MIDI Input of
the D_SYNC and connect the SYNC Out port of the D_SYNC to the DIN-SYNC input
of the device you want to control.
To convert DIN Sync to MIDI to MIDI:
Connect the DIN SYNC output of your keyboard and/or computer to the SYNC Input
of the D_SYNC and connect the MIDI Out port of the D_SYNC to the MIDI input of
the device you want to control.
You can convert in both directions at the same time if you need to do this.
The USB connector is used for power ONLY. D-Sync is not a USB MIDI device.
Status LED
:
The LED will show steady green when power is applied and flicker to indicate when
MIDI messages are being received.
Firmware version Request
:
A firmware version request must be issued within 10 seconds of power being applied
to the unit, otherwise it will be ignored.
The firmware version request message is - F0 00 20 13 16 60 F7 (hex)
The unit replies with the version number as F0 00 20 13 16 6F xx xx xx xx F7 (hex).
Where xx is a number in ASCII and the leftmost digit is the most significant.
For example - F0 00 20 13 16 6F 31 32 33 34 F7 (hex) = version number 1234

Produkt Specifikationer

Mærke: Kenton
Kategori: Ikke kategoriseret
Model: D-Sync

Har du brug for hjælp?

Hvis du har brug for hjælp til Kenton D-Sync stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Kenton Manualer

Kenton

Kenton PRO-DCB Manual

12 August 2024
Kenton

Kenton MERGE-8 Manual

10 August 2024
Kenton

Kenton THRU-12 Manual

9 August 2024
Kenton

Kenton PRO CV to MIDI Manual

8 August 2024
Kenton

Kenton Midi USB Host Manual

7 August 2024
Kenton

Kenton MERGE-4 Manual

7 August 2024
Kenton

Kenton D-Sync Manual

7 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025
Garritan

Garritan Harps Manual

14 Juni 2025
Marshall

Marshall CV-H20-HF Manual

14 Juni 2025
Aiphone

Aiphone IXW-MAA Manual

14 Juni 2025
Rival

Rival HM-743 Manual

14 Juni 2025
Lutec

Lutec Avony Manual

14 Juni 2025
Giordani

Giordani G-SAFE & PLAY Manual

14 Juni 2025
Gourmia

Gourmia GAF799 Manual

14 Juni 2025
Arendo

Arendo 307503 Manual

14 Juni 2025
Hughes & Kettner

Hughes & Kettner Tube 100 Manual

14 Juni 2025