Kenwood xd 803 8 Manual

Kenwood Lydanlæg xd 803 8

Læs gratis den danske manual til Kenwood xd 803 8 (64 sider) i kategorien Lydanlæg. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Kenwood xd 803 8, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/64
COMPACT HI-FI SYSTEM
INSTRUCTION MANUAL
KENWOOD CORPORATION
XD-SERIES
XD-A83
XD-853
XD-803
This instruction manual is used to describe multiple models listed above.
Model availability and features (functions) may differ depending on the country
and sales area. ‰
B60-4573-00 00 MA (K, P, Y, M, X, T, E2)
AP
0001
TEXT
DIGITAL AUDIO
COMPACT
2
Preparation section
Before applying power Caution : Read this page carefully to ensure safe operation.
For the United Kingdom
Factory fitted moulded mains plug
1.The mains plug contains a fuse. For replacement, use only
a 13-Amp ASTA-approved (BS1362) fuse.
2.The fuse cover must be refitted when replacing the fuse in
the moulded plug.
3.Do not cut off the mains plug from this equipment. If the
plug fitted is not suitable for the power points in your home
or the cable is too short to reach a power point, then obtain
an appropriate safety approved extension lead or adapter,
or consult your dealer.
If nonetheless the mains plug is cut off, remove the fuse
and dispose of the plug immediately, to avoid a possible
shock hazard by inadvertent connection to the mains
supply.
IMPORTANT: The wires in the mains lead are colored in
accordance with the following code:
Blue : Neutral
Brown : Live
Do not connect those leads to the earth terminal of a three-
pin plug.
Safety precautions
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN-
TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN
THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK
OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
CAUTION
*AC voltage selection
The AC voltage selector switch on the rear panel is set to
the voltage that prevails in the area to which the unit is
shipped. Before connecting the power cord to your AC
outlet, make sure that the setting position of this switch
matches your line voltage. If not, it must be set to your
voltage in accordance with the following direction.
AC voltage selector switch
Move switch lever to match your line voltage with a
small screwdriver or other pointed tool.
Note:
Our warranty does not cover damage caused by exces-
sive line voltage due to improper setting of the AC
voltage selector switch.
Inside this laser product, a laser diode classified as Class
3A laser radiation is contained as alerted by the internal
caution label shown above. To avoid exposure to laser
beams, do not open the cover.
The marking of products using lasers
(Except for some areas)
Units are designed for operation as follows.
Europe and U.K. ................................................. AC 230 V only
China and Russia .............................................. AC 220 V only
*Other countries...........AC 110-120 / 220-240 V switchable
U.S.A. and Canada ............................................ AC 120 V only
Australia ............................................................. AC 240 V only
L
R
SURROUND SPEAKERS
(12-16Ω)
CENTER SPEAKERS
(6
-16Ω)
+
-
AC
110
-
120V
~
AC
220
-
240V
~
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN. AVOID EXPO-
SURE TO BEAM.
The marking is located on the rear panel and says that the
component uses laser beams that have been classified
as Class 1. It means that the unit is utilizing laser beams
that are of a weaker class. There is no danger of hazard-
ous radiation outside the unit.
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT

Produkt Specifikationer

Mærke: Kenwood
Kategori: Lydanlæg
Model: xd 803 8

Har du brug for hjælp?

Hvis du har brug for hjælp til Kenwood xd 803 8 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lydanlæg Kenwood Manualer

Kenwood

Kenwood xd 951 Manual

6 Juli 2024
Kenwood

Kenwood xd 852 Manual

6 Juli 2024
Kenwood

Kenwood hm 331 Manual

6 Juli 2024
Kenwood

Kenwood M-918DAB Manual

6 Juli 2024
Kenwood

Kenwood KRF-V5030D Manual

5 Juli 2024
Kenwood

Kenwood xd 352 Manual

4 Juli 2024
Kenwood

Kenwood xd 8550 ah5 dpmh5 x Manual

4 Juli 2024
Kenwood

Kenwood LS-K701 Manual

4 Juli 2024
Kenwood

Kenwood xd 803 8 Manual

4 Juli 2024
Kenwood

Kenwood K-525 S Manual

4 Juli 2024

Lydanlæg Manualer

Nyeste Lydanlæg Manualer

Arcam

Arcam airDAC Manual

15 Januar 2025
Yamaha

Yamaha NX-P100 Manual

15 Januar 2025
Samson

Samson Resolv A8 Manual

14 Januar 2025
Boston Acoustics

Boston Acoustics Horizon Trio XT Manual

11 Januar 2025
Lynx

Lynx LT-Madi Manual

5 Oktober 2024
Lynx

Lynx LT-ADAT Manual

25 September 2024
Fusion

Fusion Apollo MS-ERX400 Manual

23 September 2024
Ricatech

Ricatech RMC400 Manual

23 September 2024
Sitecom

Sitecom wl 060 wireless audio transmitter Manual

22 September 2024
Teac

Teac w600r Manual

17 September 2024