Kern ORL 94BS Manual

Kern Måling ORL 94BS

Læs gratis den danske manual til Kern ORL 94BS (1 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Kern ORL 94BS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Catalogue

1.Introduction

2.Display and Buttons

3.Preparations before Operation

3.Preparations before Operating

4.Booting and Measurement

5.The Calibration

6.Scales Converting and Temperature Systems

Converting

7.Turn Off

8.Maintenance and Preservation

9.Appendix

Before operating your instrument, please read this

manual properly.

Panel Descriptions

3.1 Install the Battery

3.2 USB Connection

4.1 Booting

4.2 Measurement

5.The Calibration

The meter only supports pure water calibration.

The calibration method is as following:drop 0.4ml

pure water then close the cover to measure.

6.Scales converting and temperature systems converting

6.1Scales Converting

6.2Temperature System Converting

If exceed the temperature limitations,

the signs “HHH” or “LLL” would show.

7.Turn Off

1. After turn on if without any operations for 3 minutes, the

instrument would be automatically turned off.

2. Press “on/ off ” button for 2-3 seconds, the instrument

would be turned off.

8.Maintenance and Preservation

9.Appendix

1. Please clean and wash the sample plate with distilled

water and dry it with soft cleaning cloth or paper towel

after finishing the measuring one kind sample.

2. Never left the remains and residuals of samples

in the sample plate for long time.

3. After finishing measurements of the corrosive

liquid, please clean the sample plate as quick

as possible to avoid the irreparable damage of

the prism and metal surface of the plate.

4. Please use soft cleaning cloth or paper towel to

clean the sample plate to avoid scribing the

prism’s glass.

5. When the dropper and dust-free cloth are not used,

please clean it with clean water and put it in the packing

box after drying.

6. If no using the instrument for a long time,

please remove the battery, and preserved in a

cool and dry environment.

Performance:

The Error Codes Table:

Range

Accuracy Resolution

Brix

R.I.

Temperature

Dimension

Net weight

0.0%~94.0% ±0.1%

0.1%

0.0001

0.1℉

0.1℃

180*100*55mm

365g (excluding battery)

±0.0002

±0.3℃

±0.6℉

1.3330~1.5290

0.0~40.0℃

32.0~104.0℉

Code Instructions

A01

A02

A03

Beyond the scope of calibration

temperature. 1.0 ~40.0 )（ ℃ ℃

During calibration, no solution

or non-pure water

This instrument has a hardware failure.

Description of Scales Numbering:

Use the screwdriver to open the battery hatch.

Press button

for 2 seconds,

temperature

unit would be

converted.

This digital refractometer cannot measure any liquid

that is highly corrosive to metal or glass. When

measuring liquids that are corrosive to plastics or react

chemically with plastics, be careful not to drop the

measured liquid onto the shell. Otherwise it will corrode

the shell.

2 3

6 7

Press CAL once

Cyclic Switch

USB lnterface

Connect to USB for charging/connecting to the computer.

Packaging p1-x1 The instructions p1-x1 Dropper p1-x1

Screwdriver p1-x1 USB Line p1-x1 Charger p1-x1

Note :

1. When used outdoors,please avoid strong light

so as not to affect the measurement accuracy.

2. Before dripping into the sample liquid, please

clean the sample plate and Prism with soft clean

cloth or soft paper.

3. Please keep the instrument in a stable status to

measure.

4. Please ensure instrument, environment and

sample are in the same temperature level before

measuring.

After tum on,clear the distilled water and dry the

sample plate, drip 0.3~0.4ml sample then close the

cover to measure.

Cover

USB Port

Charge Lamp/Charging lndicaor

Battery Hatch

LCD Display Screen

Button

Host Display Area

Battery Capaclty

Temperature

Compensation

Refractive Index

Temperature Display Area

Multi-function Display Area

USB Connect

Power on / off

Calibrating “Zero

Point”

Converting Different

Scales&

Temperature Unit

Measurement

Display Areas and Buttons

Press "On/Off"

button to turn on

The multi-function display area

would show the current scale number.

If there is no sample,it will display “dash”

Press the “Read”

one time the meter

will measure one time.

Showing Beyond

Measuring Range

Measuring Result

If press the "Read" button for 2 seconds, the

instrument would make the automatic measurements

upon programmed times (default 15times), the final

value is the average of 15 times’ measurements, After

measurements, it will return to the normal state

and the scales display area would display the average of

the automated measurements

The multifunctional area

displays the number of

remaining automatic

measurements.For each

automatic measurement,

this number is reduced by 1.

Press “CAL” button

for 2-3 seconds till

see the ‘CAL’

flashing .to enter the

calibration status.

LED Flashing Display

Press "CAL" button once again during the ‘CAL’

flashing to start to calibrate. When the calibration is

completed showing as following.

If no any operations for 10seconds the instrument

would return back to booting status.

If fail to complete the calibration, multi-function

display area would show an error code.

Display error code A03,indicating error of sensor

measurement.See the appendix for other error codes .

Press‘Scale’once to

convert the scales

and the values.

Current Scale Number

Switching

Temperature Unit

The Packing Accessories：

Prism

Stainless Steel

Sample Groove

If is displayed, please charge it.

2024/09 V3.2

We reco end calibrating the refractometer,mm

whe co issi ingn mm on

afte a s ng shockr tro

after longer transp tor

after a change of location with a large temperature

diﬀerence

i the device has not b n used fo a long imef ee r t

Always use distilled water and make sure that the

refractometer, he water and the envi nment are a he t ro t t

sa t perature.me em



Produkt Specifikationer

Mærke:	Kern
Kategori:	Måling
Model:	ORL 94BS

Har du brug for hjælp?

Hvis du har brug for hjælp til Kern ORL 94BS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Kern Manualer

2 September 2025

1 September 2025

1 September 2025

1 September 2025

1 September 2025

1 September 2025

16 August 2025

16 August 2025

30 Juli 2025

17 Juli 2025

Måling Manualer

Nyeste Måling Manualer

Gossen Metrawatt MAVOLUX 5032 C USB Manual

26 September 2025

Gossen Metrawatt SECULIFE ST BASE IQ Manual

26 September 2025

Gossen Metrawatt MovoWatt 30 Manual

26 September 2025

Gossen Metrawatt APLUS Manual

26 September 2025

Gossen Metrawatt PROFITEST PV1500 Manual

26 September 2025

Gossen Metrawatt MAVOLUX 5032 C BASE Manual

26 September 2025

Gossen Metrawatt MAVOPAD Manual

26 September 2025

Gossen Metrawatt PROFITEST PRIME Manual

26 September 2025

Gossen Metrawatt MAVOSPEC LITE Manual

26 September 2025

Gossen Metrawatt Metraline Z Check Manual

26 September 2025