Kicker CompVR Manual

Kicker Bilhøjttaler CompVR

Læs gratis den danske manual til Kicker CompVR (11 sider) i kategorien Bilhøjttaler. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Kicker CompVR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

COMPVR SUBWOOFER

COMPVR8

COMPVR10

COMPVR12

COMPVR15

English Version

Versión Español

Altavoz Para Sonidos Graves

Deutsche Version

Tieftöner

Version Francaise

Haut-parleur d’Extrêmes Graves

LIVIN’ LOUD

2010 CompVR f01.indd 1

2010 CompVR f01.indd 12010 CompVR f01.indd 1 9/9/2009 3:49:37 PM

9/9/2009 3:49:37 PM

9/9/2009 3:49:37 PM9/9/2009 3:49:37 PM

2COMPVR SUBWOOFER 3

The Kicker CompVR subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive

environment. CompVR subwoofers are extremely versatile and surpass the competition in a sealed or

vented box. They are made of advanced materials and construction techniques to maintain optimal

performance for years to come.

SPECIFICATIONS

WIRING

CompVR subwoofers are available with dual 2 (ohm) or dual 4 voice coils. Both coils must be  

connected to a source of ampliﬁ cation. The dual 2 woofer will generate a 1 load if the coils are wired  

in parallel or a 4 load in series. The dual 4 woofer will provide a 2 load wired in parallel or 8 load    

wired in series. The terminals with the white dots are for the ﬁ rst voice coil. The terminals with solid-red

and solid-black markings are for the second voice coil. See Figure 1.

SEALED ENCLOSURE APPLICATIONS

The CompVR generates more sound pressure than competing subwoofers on the market and excels

when used in the recommended sealed boxes. These sealed enclosure designs give the smoothest

response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive

amounts of highly-accurate bass and can be driven with punishing levels of ampliﬁ er power.

The CompVR high performance suspension system can operate in a larger sealed enclosure. This

maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ enclosure

generates a very ﬂ at response curve and superbly extends the subbass response.

CompVR woofers perform well in any size

sealed enclosure between the Compact

and SQ volume recommendations. These

systems will exhibit beneﬁ ts of both designs:

Compact produces high-impact bass,

and SQ generates low bass frequency

protraction. Overall, the system will sound

more like the recommended enclosure

design it is closest to in enclosure volume.

These enclosure recommendations have

been calculated with the airspace inside the

enclosure and include the displacement of

the woofer. All sealed-enclosure airspace

should be ﬁ lled to 50% loose poly-ﬁ l

(polyester ﬁ berﬁ ll) stufﬁ ng.

CompVR Subwoofer Owner’s Manual

Authorized KICKER Dealer:

Purchase Date:

Speaker Model Number:

Speaker Serial Number:

Model CompVR CompVR8 10 CompVR CompVR12 15

Nominal Impedance [Zn], ohm 2 or 4 2 or 4 2 or 4 2 or 4

Resonance Frequency [fs], Hz 52.7 43.8 32.6 24.6

Power Handling Watts, Peak (RMS) 400 (200) 800 (400) 800 (400) 1000 (500)

Sensitivity [SPLo], dB @ 1W, 1m 82.8 83.6 86.9 89.2

Effective Excursion [EXmax™], in (mm) .408 (10.37) .501 (12.73) .501 (12.73) .492 (12.5)

DC Resistance [Re], ohm 4.1 3.7 3.5 3.7

Mechanical Q-Factor [Qms] 9.577 10.03 8.166 9.138

Electrical Q-Factor [Qes] .937 .914 .703 .398

Total Q-Factor [Qts] .853 .838 .648 .381

Equivalent Volume [Vas], ft³ (L) .279 (7.925) .570 (16.159) 2.3 (65.294) 5 (143.82)

Net Displacement, in³ (cc) 33.9 (555.5) 60.4 (989.8) 75.9 (1243.8) 176.6 (2893.9)

Outer Frame Diameter, in (cm) 8-1/2 (21.6) 10-11/16 (27.1) 12-5/8 (32) 15-1/2 (39.3)

Hole Cut-Out Diameter, in (cm) 6-15/16 (17.6) 9-3/16 (23.3) 11 (27.8) 13-11/16 (34.7)

Mounting Depth, in (cm) 4-1/4 (10.8) 5-1/2 (14) 6-1/4 (15.9) 8-3/16 (20.7)

Model Volume ft3 (L) Panel A in. (cm) Panel B in. (cm) Panel C in. (cm)

CompVR8 .4 (11.3) 11X11 (27.9X27.9) 11X8.125 (27.9X20.6) 9.5X8.125 (24.1X20.6)

CompVR10 .8 (22.7) 13.5X13.5 (34.3X34.3) 13.5X10.125 (34.3X25.7) 12X10.125 (30.5X25.7)

CompVR12 1 (28.32) 14.5X14.5 (36.8X36.8) 14.5X11 (36.8X27.9) 13X11 (33X27.9)

CompVR15 1.8 (51) 17.25X17.25 (43.8X43.8) 17.25X13.5 (43.8X34.3) 15.75X13.5 (40X34.3)

Model Volume ft3 (L) Power Handling

CompVR8 .4 (11.3) 200W RMS

CompVR10 .8 (22.7) 400W RMS

CompVR12 1 (28.3) 400W RMS

CompVR15 1.8 (51) 500W RMS

Model Volume ft3 (L) Power Handling

CompVR8 1.8 (51) 140W RMS

CompVR10 3 (85) 300W RMS

CompVR12 4.6 (130) 300W RMS

CompVR15 5.2 (147) 500W RMS

CompVR CompVR CompVR CompVR8 / 10 / 12 / 15

Models:

Panel Dimensions for Compact Sealed Enclosures using 3/4” (1.9cm) thick MDF (See Figure 2)

Sealed Compact Sealed SQ

Note: All speciﬁ cations and performance ﬁ gures are subject to change. Please visit www.kicker.com for the most

current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine

KICKER Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum

performance.

Figure 2

Figure 1 Series WiringParallel Wiring

Dual 2 Voice Coils = 4 Load 

Dual 4 Voice Coils = 8 Load 

Dual 2 Voice Coils = 1 Load 

Dual 4 Voice Coils = 2 Load 

Coil 1+Coil 1+

Coil 2+Coil 2+

Coil 2-Coil 2-

Coil 1-Coil 1-

2010 CompVR f01.indd 2-3

2010 CompVR f01.indd 2-32010 CompVR f01.indd 2-3 9/9/2009 3:49:40 PM

9/9/2009 3:49:40 PM

9/9/2009 3:49:40 PM9/9/2009 3:49:40 PM

Produkt Specifikationer

Mærke:	Kicker
Kategori:	Bilhøjttaler
Model:	CompVR
Bredde:	- mm
Dybde:	- mm
Højde:	- mm
Produktfarve:	Sort
Produkttype:	Subwoofer driver
Grænseflade:	Terminal
Svingspole type:	Dobbelt
Subwoofer RMS-effekt:	400 W
Subwoofer driver diameter (britisk):	12 "
Subwoofer driver diameter:	30 mm
Subwoofer frekvensomrpde:	25 - 500 Hz
Subwoofer spidseffekt:	800 W
Subwoofer, følsomhed:	86.9 dB
Subwoofer-impedans:	4 ohm (Ω)