Kicker DS65.2 Manual

Kicker Højttaler DS65.2

Læs gratis den danske manual til Kicker DS65.2 (12 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Kicker DS65.2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

DS SYSTEMCOMPONENT

DS DS DS600.2, 650.2, 680.2

2007 DS Components Multilingual a01.qxp 11/12/2008 3:47 PM Page 1

Your DS components were specially designed for “Livin’ Loud” out in the harsh automotive

environment. They are made of advanced materials and construction techniques to

maintain optimal performance for years to come.

Application

The Kicker DS component systems are specifically designed for mounting in free-air

applications. The speakers do not require a sealed enclosure for optimum performance. It is

important to isolate the sound coming off the front of the driver from the sound radiating

from the back of the driver. This isolation is usually accomplished by using the driver in a

factory speaker location, or in a location with a semi-isolated rear chamber. See Figure 1.

Location

The sound produced by the DS components is directional, particularly for the tweeter’s

sonic output. The external crossover has a High Frequency Output Attenuation switch

(0, 3 & 6dB) that allows for added flexibility in positioning the tweeter. Find the best location

for stereophonic sound. If necessary, add more DS component systems to the audio

system to help distribute and balance the sound. After determining the best mounting

locations, carefully check the areas where the mounting hardware will be placed.

See Figure 2.

INSTALLATION

Congratulations on your

KICKER purchase

Please record your purchase

information and keep your sales

receipt for validation of warranty.

Authorized Kicker Dealer:

Purchase Date:

Speaker Model Number:

_________________________

Note: All specifications and performance figures are subject to change. Please visit the www.kicker.com for the most current information.

To get the best performance from your new Kicker speakers, we recommend using genuine Kicker Accessories and Wiring.

Please allow two weeks of break-in time for the speaker to reach optimum performance.

INSTALLATION

DSComponentSystem

Owner’sManual

DS DS DS600.2 /650.2 /680.2

Models:

WooferMounting

If you are replacing factory speakers in their original locations, you may have to enlarge the

speaker cut-outs and pre-drill new screw holes using a 7/64” (2.5mm) bit. Custom mounting

locations will require more preparation and work. In either case, make sure the speaker will

not interfere with the trunk and door opening and closing mechanisms, and the enclosed

screws will not puncture the fuel tank, wiring, or interfere with any other mechanical parts on

the underside of the mounting surface. Cycle the windows all the way down and up.

If the speaker cut-out locations require you to cut metal, avoid structural metal and braces.

If the door body and panel cannot support the weight of the speaker, an optional reinforcing

panel (thin piece of wood or Medium Density Fiberboard) may be sandwiched between the

panels. Mount the speaker to the vehicle as outlined in Figure 2.

If factory speaker wiring is not available in your desired location, it may be necessary to run

the supplied wire through the door jamb. The speaker wire should be kept away from sharp

edges and avoid the possibility of getting pinched by the door. An existing grommet in the

door jamb is the ideal place to run the speaker wire. If the factory hole and grommet do not

exist or are inaccessible, you must drill a hole

to run the speaker wire through the door jam.

Be careful not to drill into other wiring or

exiting door mechanisms. Any time a wire is

run through a hole, it is necessary to insert a

rubber or plastic grommet to protect the wire

from damage as outlined in Figure 3.

If the supplied hardware is not applicable to

your installation, some other means of

securely attaching the speakers to the vehicle

must be used.

F uig re 1

DSCOMPONENTSYSTEM

R ear Seat

Tr n S a eu k / Storage p c R dear Soun

W va es

F o dr nt Soun

W va es

F u ig re 2

D roo Panel

P c p k h dla e S ea er Grille er ov t e Mi range/Woofer

Dri er an nt wit en sev d mou h t eh c old Screws

D roo Body R ceinfor ing Panel

(Optional)

M di range/Woofer

Dri erv

Speaker rille G

Screws

Stagger les ht e ho for

t e ah wiring an sed u

r rubber o plastic

grommet to pr totec

t e r ah wire f om d mage

S t tpeaker cu -ou

F uig re 3

F o r nt Door Body

F o hr nt Das

Kick Panel

Speaker

cu -out t

To speaker terminals

To t eh

external

c or ss erov

DS nent Dri er Compo v

2007 DS Components Multilingual a01.qxp 11/12/2008 3:47 PM Page 2

Produkt Specifikationer

Mærke:	Kicker
Kategori:	Højttaler
Model:	DS65.2
Frekvensområde:	35 - 21000 Hz
Impedens:	4 ohm (Ω)
Diskanthøjttaler:	Ja
Sensitivitet:	90 dB
Delefrekvens:	4000 Hz
Form:	Rund
Diskant diameter:	20 mm
Woofer diameter:	165 mm
Subwoofer inkluderet:	Ingen
Vurderet effekt:	60 W
Maksimal strøm:	120 W
Indbygningsdybde:	46 mm
Diskanthøjttaler, magnettype:	Titanium