Kiloview RN03 Manual

Kiloview Ikke kategoriseret RN03

Læs gratis den danske manual til Kiloview RN03 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 64 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 32.5 anmeldelser. Har du et spørgsmål om Kiloview RN03, eller vil du spørge andre brugere om produktet?

Side 1/5

RN03 3RU Video encoding and decoding Chassis

Leading solution provider of IP-based video transmission

Q ck Start Guide ui

Contents

◼ Chassis installation

◼ Encoding Application

◼ Decoding Application

Before using this product, it is recommended that you read the guide carefully. To ensure your personal safety and avoid physical or electrical damage to the

device. Please strictly follow the instructions of this guide or install and use it under the guidance of professionals. Incorrect electrical connections or physical

installation may cause permanent damage to the device and even threaten personal safety.

1. RN03 Installation

Align the card assembly with the card slots and push in vertically, then tighten the double-sided screws.

Reverse the process for removal.

Note

⚫ The chassis is a plug-in structure, which can easily complete the replacement/mixing of N series codec, realizing the

same chassis compatible with 1/2/3/4 channels and multi-interface, encoding/decoding mixed solutions. The chassis

has no centralize power supply, and each module needs to be powered separately for normal operation.

⚫ Tally-green light: indicates that the current video is in Preview state; red light: indicates that the current video is in

Program state.

⚫ The chassis is a plug-in structure, which can easily complete the replacement/mixing of N series codec, realizing the

same chassis compatible with 1/2/3/4 channels and multi-interface, encoding/decoding mixed solutions. The chassis

has no centralize power supply, and each module needs to be powered separately for normal operation.

⚫ LED indicator. Power: always white indicates that power is connected LINK: white flashing indicates normal network ；

access Run: flashing white indicates normal work in progress ；LED indicator.

1.Fasten the device to the mount rack

2. Align and push the device in parallel

12V Fan powered

TYPE-C expansion

Tally light

LED indicator

2. Tighten the left and right screws

Produkt Specifikationer

Mærke:	Kiloview
Kategori:	Ikke kategoriseret
Model:	RN03

Har du brug for hjælp?

Hvis du har brug for hjælp til Kiloview RN03 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Kiloview Manualer

Kiloview 4G Bonding Encoder Manual

10 December 2024

Kiloview Cube R1 Manual

10 December 2024

Kiloview NDI Recorder Manual

5 September 2024

Kiloview D260 Manual

3 September 2024

Kiloview LinkDeck Manual

1 September 2024

Kiloview MG300 Manual

1 September 2024

Kiloview U40 Manual

1 September 2024

Kiloview RU-01 Manual

1 September 2024

Kiloview N30 Manual

1 September 2024

Kiloview RN01 Manual

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 300004 Manual

16 Juni 2025

Playtive IAN 321241 Manual

16 Juni 2025

Cleveland 24CEA10 Manual

16 Juni 2025

Hughes & Kettner

Hughes & Kettner Redbox Pro Manual

16 Juni 2025

Playtive IAN 279576 Manual

16 Juni 2025

Playtive IAN 321903 Manual

16 Juni 2025

Wahoo RPM Cadence Manual

16 Juni 2025

Playtive IAN 359564 Manual

16 Juni 2025

Playtive IAN 272426 Manual

16 Juni 2025

Playtive IAN 321236 Manual

16 Juni 2025