KitchenAid W10395148 Manual

KitchenAid Køleskab W10395148

Læs gratis den danske manual til KitchenAid W10395148 (3 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om KitchenAid W10395148, eller vil du spørge andre brugere om produktet?

Side 1/3
REVERSIBILITY KIT INSTRUCTIONS
Parts Included:
Brand badge removal tool
Brand badge template
Hole cover decal (color coordinated to exterior)
Tools Needed:
Scissors
Masking tape
Freezer Door
from the freezer door by lifting up the right-hand side and
peeling the badge away from the door from right to left.
NOTE: To avoid scratching the door, do not use a sharp or
metallic object to pry the brand badge from the door.
2. Rub a small amount of liquid dish soap over any adhesive
residue with your fingers. Rinse the door with warm water and
dry with a soft cloth.
3. Cut the template along the dotted lines that match the shape
of the brand badge.
4. Align the edges of the template with the side and top of the
freezer door and tape the template to the door.
NOTE: When the template is correctly aligned, the hole in the
door, where the handle was, will be within the cutout of the
template, as shown.
5. Using the cutout as a guide, press the brand badge onto the
freezer door making sure that the hole is completely covered.
6. Slowly remove the template.
Refrigerator Door
1. Remove the decal covering the hole on the opposite side of
the door, where the refrigerator door handle will be installed,
and discard the decal.
2. Rub a small amount of liquid dish soap over any adhesive
residue with your fingers. Rinse the door with warm water and
dry with a soft cloth.
3. After installing the door handle on the opposite side, cover the
remaining hole with the decal that matches the color of the
refrigerator exterior.
W10394433A
INSTRUCTIONS DE LA TROUSSE DE RÉVERSIBILITÉ
Pièces fournies :
Outil de retrait de l'insigne de la marque
Gabarit de l'insigne de la marque
Transfert de cache pour les trous (couleur assortie à l'extérieur)
Outillage nécessaire :
Ciseaux
Ruban adhésif de masquage
Porte du congélateur
1. À l'aide de l'outil de retrait (fourni), retirer l'insigne de la
marque de la porte du congélateur en soulevant le côté droit
et en décollant l'insigne de la porte, de droite à gauche.
REMARQUE : Afin d’éviter dérafler la porte, ne pas utiliser
d'objet pointu ou métallique pour arracher l'insigne de la
marque de la porte.
2. Frotter une petite quantité de savon liquide à vaisselle sur les
résidus d’adhésif avec les doigts. Rincer la porte à l'eau tiède
et sécher avec un chiffon doux.
3. Couper le gabarit le long des pointillés qui correspondent à la
forme de l'insigne de la marque.
4. Aligner les bords du gabarit avec les parties latérale et
supérieure de la porte du congélateur et fixer le gabarit sur la
porte à l'aide du ruban adhésif.
REMARQUE : Une fois le gabarit correctement aligné, le trou
dans la porte, à l'emplacement de la poignée, se trouvera
dans l'ouverturecoupée du gabarit, tel qu'illustré.
5. En utilisant cette ouverture comme guide, appuyer l'insigne de
la marque sur la porte du congélateur, en veillant à ce que le
trou soit entièrement recouvert.
6. Retirer lentement le gabarit.
Porte du réfrigérateur
1. Retirer le transfert qui recouvre le trou du côté opposé de la
porte, là où la poignée de la porte du réfrigérateur doit être
installée, et jeter le transfert.
2. Frotter une petite quantité de savon liquide à vaisselle sur les
résidus d’adhésif avec les doigts. Rincer la porte à l'eau tiède
et sécher avec un chiffon doux.
3. Après avoir installé la poignée de porte du côté opposé,
recouvrir le trou restant avec le transfert assorti à la couleur de
l'extérieur du réfrigérateur.
W10394433A
© 2011.
All rights reserved.
Tous droits réservés.
3/11
Printed in Mexico
Imprimé au Mexique


Produkt Specifikationer

Mærke: KitchenAid
Kategori: Køleskab
Model: W10395148

Har du brug for hjælp?

Hvis du har brug for hjælp til KitchenAid W10395148 stil et spørgsmål nedenfor, og andre brugere vil svare dig