KJB Security Products DD3150 Manual


Læs gratis den danske manual til KJB Security Products DD3150 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om KJB Security Products DD3150, eller vil du spørge andre brugere om produktet?

Side 1/4
DD3150 Detector Manual
Introduction
Thank you for choosing the DD3150 RF Detector & Camera Lens Finder. Before using, please read through the
instruction manual for proper operation of the device. This multi-function product can effectively prevent
videotaping protect your privacy. The wireless detection function of this product can detect wireless devices and
within a frequency range of 1MHz-6.5GHz. The camera lens nder function works on a variety of camera types
including video CCTV cameras, digital cameras, auto focus cameras, camcorders, and spy/pinhole-type
cameras.
Box Contents
Detector/Camera Lens Finder X 1
Charger X1
Manual X1
Features
● Backlit LCD display with battery, signal strength, and alert mode indicators
● Flashing LED lights and view nder for detecting a variety of camera lenses, both overt and covert
● Detection of hidden wireless systems, such as listening devices or camera systems
● Detection frequency range of 1MHz6.5GHz
● Visual and Audible or Vibrating wireless detection alerts
Wireless signal strength indicator and adjustable detection sensitivity for narrowing in on signal source
● Built-in rechargeable lithium battery allowing up to ve hours of continuous use between charges
● Retractable telescoping antenna
● Compact and very convenient to transport, easily tting in pockets
Specications
● Detection frequency range: 1MHz6.5GHz
● SIZE: 78mm X 58mm X 15mm
Weight: 50g
Antenna length: 23mm collapsed, 90mm extended
● Battery: Built-in 3.7V 500mA
● Current consumption: 100mA
● Charging voltage: 5-6VDC
Product Overview
Using your device
General Directions:
1. Fully charge the detector prior to rst use - Charge Indicator light will come on while charging, then turn off
once device is fully charged
2. Press and release the Power on/off switch to turn on the device
3. With the device turned on, press and release the Power on/o switch to toggle the detector between
Audible and Vibration alerts
4. Adjust the sensitivity of the detector by rotating the Signal sensitivity adjustment wheel
5. With the device turned on, press and release the LED Light switch to toggle the red, ashing LED lights
on or off for use with the camera lens view nder
6. Press and hold the Power on/off switch for approximately 2-3 seconds to turn off the device
Calibrating the Detector:
1. Turn on the device and select your alert mode
2. Take the device to an area free of any potential signals, such as outdoors
3. Fully extend the retractable antenna
4. Adjust the sensitivity of the detector all the way down(count -clockwise) er
5. Slowly adjust the sensitivity of the detector up(clockwise) until an alert is received
6. Gently adjust the sensitivity of the detector back down until the alert stops
7. The detector is now calibrated and ready to sweep for transmitters
Light
,
Lens View Finder
LED Lights(on back)
L CD


Produkt Specifikationer

Mærke: KJB Security Products
Kategori: Ikke kategoriseret
Model: DD3150

Har du brug for hjælp?

Hvis du har brug for hjælp til KJB Security Products DD3150 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret KJB Security Products Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer