Klipsch CDT-3800-C Manual

Klipsch Højttaler CDT-3800-C

Læs gratis den danske manual til Klipsch CDT-3800-C (5 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Klipsch CDT-3800-C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

CDT ARCHITECTURAL

LOUDSPEAKER

OWNER'S MANUAL

™

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance

with the manufacturer's instructions.

8. DO NOT install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wider blade or the third prong are provided

for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the

manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused

for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

This symbol indicates that there are important

operating and maintenance instructions in the

literature accompanying this unit.

This symbol indicates that dangerous voltage

constituting a risk of electric shock is present within

this unit.

WARNING: To reduce the risk of fire or electrical shock, do not

expose this apparatus to rain or moisture.

WARNING: Voltages in this equipment are hazardous to life. No

user-serviceable parts inside. Refer all servicing to qualified

service personnel.

CAUTION: Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate this device.

ABOUT YOUR KLIPSCH PURCHASE

Your new Klipsch architectural speakers have been designed to

deliver great sound while remaining unobtrusive wherever you

install them. These models feature Controlled Dispersion

Technology™. This allows you to point the sound as needed in

a variety of installations. Any CDT is suitable for use as front,

center or surround channels in audio or home theater

applications, or as part of a distributed sound system. Any CDT

model ending with SC is designed specifically for surround use

in home theater applications.

Minimum Tools Required

#2 Phillips Screwdriver

Wire strippers

Level

Stud finder

Saw

In-Ceiling Speaker Placement

Designed to function in any drywall or drop ceiling, Klipsch

in-ceiling speakers are engineered for years of performance.

Minimum construction requirements call for drywall or other

mounting surfaces to be at least 3/8" thick. In drop ceiling

installations, typical "drop in" 2’ x 4’ and 2’ x 2’ ceiling tiles are

composed of low density materials which have the potential over

time to sag and vibrate audibly. To maximize the acoustic

performance of your in-ceiling speakers, Klipsch recommends

you replace the original mounting panel with 1/2" to 3/4"

plywood or medium density fiberboard (MDF) (see above).

Speaker Installation (for New Construction, skip to step #3)

1. Cut the appropriate size opening in the wall or ceiling using

the template provided. If the template is not available, cutout

dimensions are provided on the Klipsch website,

www.klipsch.com. Sizes listed are minimum. If accuracy of cut

cannot be achieved, you may add 1/4" to each dimension. Be

careful not to cut through any existing wiring or plumbing. Avoid

compromising any fire stops between studs.

2. Run speaker wiring (18 gauge minimum) to the openings. Be

sure to comply with all building codes in your area.

3. Attach the wire to the speaker using the wire’s color coding or

markings as a guide to maintain proper polarity.

ARCHITECTURAL SPEAKERS

Produkt Specifikationer

Mærke:	Klipsch
Kategori:	Højttaler
Model:	CDT-3800-C
Produktfarve:	Hvid
Udgangseffekt (RMS):	50 W
Equalizer:	Ingen
Husmateriale:	Syntetisk ABS
Anbefalet brug:	Andet
Frekvensområde:	56 - 20000 Hz
Impedens:	8 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Højttaler, type:	2-vejs
Lyd-output kanaler:	1.0 kanaler
Højttaler, placering:	Kan monteres i loftet
Diameter:	249 mm
Antal drivere:	1
Diskanthøjttaler:	Ingen
Peak Music-Udgangseffekt (PMPO):	200 W
Sensitivitet:	92 dB
Delefrekvens:	3455 Hz
Diskant diameter:	1 "
Bashøjttaler:	Ingen
Woofer diameter:	203 mm
Forstærker:	Ingen
Woofer diameter (britisk mål):	8 "
Drivercylinder, materiale:	Aluminium
Egnet til udendørs brug:	Ingen