Klipsch Reference RW-12 Manual

Klipsch Subwoofer Reference RW-12

Læs gratis den danske manual til Klipsch Reference RW-12 (24 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Klipsch Reference RW-12, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

REFERENCE

SUBWOOFERS

OWNER'S MANUAL

REFERENCE SERIES

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wider blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

This symbol indicates that there are important operating and maintenance instructions

in the literature accompanying this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit.

WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain

or moisture.

WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualified service personnel.

CAUTION: Changes or modifications not expressly approved by the manufacturer could void the

user’s authority to operate this device.

ABOUT YOUR KLIPSCH PURCHASE

Thank you for your purchase of a Klipsch subwoofer. After reading this manual and connecting

your system, you will hear the result of over 55 years of stringent engineering and class-leading

research and development. Please be sure to fill out the warranty card at the back of this

manual or online at www.klipsch.com so we are better able to serve you. Again, thank you

for choosing Klipsch and we hope that your subwoofer brings life to your music and movies for

many years.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

PLACEMENT

Although your Reference Series subwoofer will perform well in a wide variety of locations, you

will get the most out of it by following some simple guidelines:

•Although the subwoofer’s orientation is not critical, avoid placing the front (driver) side of the

cabinet up against a wall.

• The subwoofer’s output will increase as it is moved closer to walls, with maximum output

achieved when it is placed in a corner. If practical, always place the subwoofer against or

near a wall.

• In most rooms, a subwoofer will deliver smoothest bass response when placed in a corner

away from room openings, such as doors.

• If you are using more than one subwoofer, you will usually achieve the best performance by

placing them together in the same area rather than by spacing them apart.

CONNECTION AND ADJUSTMENT

Make all connections with the power turned off on your subwoofer and main amplifier. Your

subwoofer has three sets of input connections on its back panel: (1) a single LFE-Direct RCA

jack that bypasses the internal crossover; (2) a pair of RCA jacks for line-level stereo (or mono)

input; and (3) a set of terminals for connection to speaker outputs on a receiver or amplifier. In

addition, there are four controls on the back panel: (1) Main Power; (2) Auto Power On/Off;

(3) Phase; and (4) Lowpass Crossover Frequency. The Volume Level control is located on the

upper right side panel of the subwoofer.

Digital Surround Receiver or Processor Connection — Today’s Dolby Digital

®(AC-3) and

DTS®digital surround receivers and processors have line-level subwoofer outputs and built-in

subwoofer crossovers. If your system is built around one of these, it will almost always be best

to connect the subwoofer output on the receiver or processor to the subwoofer’s LFE Direct

input. (See Figure 1.) This will bypass the subwoofer’s internal crossover and should only be

done if these can be managed internally in the receiver. Use a shielded, high quality subwoofer

interconnect cable of appropriate length with RCA plugs on each end. Your dealer can help you

select a suitable cable. Be sure to go into your receiver or processor’s speaker setup menu

and set Subwoofer to "On" or "Yes." Your receiver or processor may have additional bass man-

agement abilities beyond simply activating the subwoofer output. Consult your receiver or

processor’s owner’s manual or your dealer for more information on the proper bass manage-

ment settings for your system.

Power — Set the subwoofer’s Main Power switch to "Off." Then plug the power cord into an

AC outlet. You can turn the power on and off manually using the switch, or you can leave the

Main Power turned on and set the Auto Power switch to "On," which will automatically turn the

subwoofer on when a signal is detected at one of the inputs and off after a period of inactivity.

We recommend Auto Power "On" for most systems.

Figure 1

ENGLISH

Produkt Specifikationer

Mærke:	Klipsch
Kategori:	Subwoofer
Model:	Reference RW-12

Har du brug for hjælp?

Hvis du har brug for hjælp til Klipsch Reference RW-12 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Subwoofer Klipsch Manualer

Klipsch Reference RW-8 Manual

20 Februar 2025

Klipsch Reference RW-10 Manual

20 Februar 2025

Klipsch KSW-15 Manual

20 Februar 2025

Klipsch Icon XW-300 Manual

20 Februar 2025

Klipsch KSW-12 Manual

19 Februar 2025

Klipsch Icon XW-500d Manual

19 Februar 2025

Klipsch Reference RW-12 Manual

19 Februar 2025

Klipsch Reference RW-5802 II Manual

8 December 2024

Klipsch RSW-10 Manual

18 November 2024

Klipsch KI-215-SMA-II Manual

13 November 2024

Subwoofer Manualer

Nyeste Subwoofer Manualer

DS18 IXS12.4S Manual

16 Juni 2025

RCF SUB 9019-AS Manual

16 Juni 2025

Induction Dynamics SW4 Manual

15 Juni 2025

Pure Acoustics Sub AS10 Manual

15 Juni 2025

RCF SUB 9029-AS Manual

15 Juni 2025

RCF SUB 9016-AS Manual

15 Juni 2025

Planet Audio P8AW Manual

15 Juni 2025

Planet Audio P10AW Manual

15 Juni 2025

Induction Dynamics SW2 Manual

10 Juni 2025

Induction Dynamics SW5.W Manual

9 Juni 2025