König CMP-BARSCAN30 Manual

König Stregkodelæser CMP-BARSCAN30

Læs gratis den danske manual til König CMP-BARSCAN30 (48 sider) i kategorien Stregkodelæser. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om König CMP-BARSCAN30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/48

CONTENTS

Getting Started ----------------------------------------------------------

Setup Procedures --------------------------------------------------------

Setup Menu---------------------------------------------------------------

Setup flow Chart --------------------------------------------------------

Group 0 : Interface Selection ----------------------------------------

Group 1 : Device Selection for keyboard interface---------------

6-7

Group 2 : Inter-character Delay -------------------------------------

Group 3 : Language for Keyboard Interface ----------------------

9-10

Group 4 : Terminator--------------------------------------------------

11-12

Group 5 : Scan Mode -------------------------------------------------

13-14

Group 6 : Preamble and Postamble ---------------------------------

Group 7 : Reserved ---------------------------------------------------

Group 8 : RS-232 Parameters ---------------------------------------

16-18

Group 9 : Code 39 / Code 32 ----------------------------------------

19-20

Group 10-1: Interleaved 2 of 5 ---------------------------------------

Group 10-2: Industrial 2 of 5 / IATA---------------------------------

Group 10-3: Matrix 2 of 5----------------------------------------------

Group 10-4: China Postage--------------------------------------------

Group 11 : Code 128/ Code 93/ Code 11/ MSI-PLESSEY------

25-26

Group 12 : ISBN/ISSN-------------------------------------------------

Group 13 : Codabar / NW7--------------------------------------------

Group 14 : Code 4------------------------------------------------------

Group 15-1 : EAN 13 / JAN 13---------------------------------------

Group 15-2 : UPC-A----------------------------------------------------

Group 15-3 : EAN-8 / JAN-8------------------------------------------

Group 15-4 : UPC-E / UCC EAN-128-------------------------------

Group 16 : General Parameters---------------------------------------

Group 17 : Code ID Settings------------------------------------------

Group 18 : Wand Type Parameters----------------------------------

Group 19 : Magnetic Parameters-------------------------------------

37-39

Group 20 : Function Key Emulation---------------------------------

Function Code for PC XT/AT

41-42

Table-Hex : Hexadecimal---

ASCII Table---------------

Hexadecimal-Decimal Conver

Pin Assignments of Scanner

46-47

Getting Started

Installing Keyboard Wedge Scanner

To install a keyboard wedge scanner, follow the steps listed below:

1) Make sure that the scanner has the correct Y (U)- cable for the system (a PC or terminal)

2) Turn off the power of the system

3) Unplug the keyboard from the system

4) Connect the Y (U)- cable to the system and keyboard

5) Turn on the power of the system

6) If the indicator LED lights up and the buzzer sounds, the scanner is ready for reading

Installing a RS-232 Interface Scanner

To install a RS-232 interface scanner, the host device should have a RS-232 port to

receive data from the scanner, follow the steps listed below:

1) Make sure that the scanner has the right connector for the RS-232 port of the host device

2) Make sure that there is a power supply to the scanner (if necessary)

3) Connect the cable to the RS-232 port of the device

4) If the indicator LED lights up and the buzzer sounds, the scanner is ready for reading

Produkt Specifikationer

Mærke:	König
Kategori:	Stregkodelæser
Model:	CMP-BARSCAN30
Vægt:	160 g
Produktfarve:	Grå
Opbevaringstemperatur (T-T):	-20 - 65 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	0 - 50 °C
Husmateriale:	Syntetisk ABS
Certificering:	FCC class A
Slagfast:	Ja
Sensortype:	Laser
Standard grænseflader:	USB
Bølgelængde:	670 nm
Strømforbrug:	90 mA
Indbygget processer:	Intel 80C31
Skanningshastighed:	100 sek./side
Lysniveauer (direkte sollys):	3000 - 8000 Lux