König KN-RFRO KIT Manual

König Ikke kategoriseret KN-RFRO KIT

Læs gratis den danske manual til König KN-RFRO KIT (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om König KN-RFRO KIT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

KN-RFROKIT

ENGLISH

The radio control units included in the packaging are already

programmed in bistable mode and ready to use. To reprogram the

remote controls, please follow below steps.

Programming the König receiver or additional remotes:

(To be performed on the receiver, picture 1)

The receiver can be programmed into: monstable or bistable

mode

This König remote can be programmed to control output 1 and output 2

of the receiver in bistable or monostable mode.

Example1: With the monostable mode, you can sent out a pulse to the

central unit of an automatic gate and open it.

Example 2: With the bistable mode, you can switch on a device (like a

lamp) by pressing the button one time, to switch o the device you have

to press the same button once again.

Example 3: If you use the monostable mode with a lamp, you push the

button to switch on the lamp, but when you release this button the

lamp switches o.

So, you only should use the monostable mode if you need a pulse,

otherwise you have to use the bistable mode.

STEP 1:

Press the P1 button on the receiver:

1 time to program output 1 in monostable mode.

2 times to program output 2 in monostable mode.

3 times to program output 1 in bistable mode.

4 times to program output 2 in bistable mode.

STEP 2 (perform immediately after step 1 is carried out):

Keep pressing button A or B on the König remote (picture 2) that you

want to sync until the LED on the receiver begins to ash.

Erasing codes

There are two types of erasing.

A: Erasing of an individual code:

Press key P2 for approx. 2 seconds (release the key); the LED will light

up, press the key on the König remote control you would like to delete.

B: Erasing all acquired codes:

Press key P2 until the LED lights up (approx. 8 seconds).

Receiver

Ant Aux

Not included

Produkt Specifikationer

Mærke:	König
Kategori:	Ikke kategoriseret
Model:	KN-RFRO KIT

Har du brug for hjælp?

Hvis du har brug for hjælp til König KN-RFRO KIT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret König Manualer

König SAS-FIX11 Manual

20 August 2024

König ANT 117-KNL Manual

12 August 2024

König KNANIR2502B700 Manual

12 August 2024

König KNANIR2501B700 Manual

10 August 2024

König CMP-POWG41 Manual

5 August 2024

König KN-RFRO KIT Manual

4 August 2024

König SAS-ASSS300 Manual

27 Juli 2024

König SAS-DUMMYMS10 Manual

26 Juli 2024

König CSU3HDE35S100 Manual

25 Juli 2024

König CSBTTRNSM100 Manual

20 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Miele WTV 417 Manual

10 Oktober 2025

Miele EBA 7747 Manual

10 Oktober 2025

Panasonic MX-HG4401 Manual

10 Oktober 2025

Fresh 'n Rebel Selfie Stick Manual

10 Oktober 2025

TOA VX-3308WM Manual

10 Oktober 2025

Teka EWH 100 DHH Manual

10 Oktober 2025

Xerox App Gallery Manual

10 Oktober 2025

Miele WTV 511 Manual

10 Oktober 2025

Miele WTV 601 Manual

10 Oktober 2025

Miele GaLa-S Manual

10 Oktober 2025