König OSP-SX110TA Manual

König Højttaler OSP-SX110TA

Læs gratis den danske manual til König OSP-SX110TA (58 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 27 anmeldelser. Har du et spørgsmål om König OSP-SX110TA, eller vil du spørge andre brugere om produktet?

Side 1/58
OSP-SX110ta/OSP-SX112ta
OSP-SX115sa/OSP-SX118sa
MANUAL (p. 2 )
Active Speaker System 15” + 12”
ANLEITUNG (S. 6 )
Aktives Lautsprechersystem 15” + 12”
MODE D’EMPLOI (p. 10 )
Système de Haut-parleurs Actif 15” + 12
GEBRUIKSAANWIJZING (p. 14 )
Actief luidsprekersysteem 38 en 30,5 cm (15
en 12 inch)
MANUALE (p. 18 )
Sistema casse attive 15” + 12” MANUAL DE USO (p. 22 )
Sistema de altavoces activo 15” + 12”
HASZNÁLATI ÚTMUTATÓ (o. 26. )
15” + 12”-os aktív hangszórórendszer KÄYTTÖOHJE (s. 30 )
Aktiivikaiutinjärjestelmä 15” + 12”
BRUKSANVISNING (s. 34 )
Aktivt högtalarsystem 15” + 12” NÁVOD K POUŽITÍ (s. 38 )
Systém aktivních reproduktorů 15” + 12”
MANUAL DE UTILIZARE (p. 42 )
Sistem activ de difuzoare 15” + 12” ΕΓΧΕΙΡΙ∆ΙΟ XPHΣ ΣH (σελ. 46 )
Ενεργό Σύστημα Ηχείων 15” + 12
BRUGERVEJLEDNING (p. 50 )
Aktivt højttalersystem 15” + 12”
VEILEDNING (p. 54 )
Aktivt høyttalersystem 15” + 12”
2
ENGLISH
Active Speaker System 15” + 12”
Rear Panel Description – Top Speaker
01. Mic/line input XLR/1/4 TRS (tip-ring sleeve) input jack
02. Mic gain Adjust microphone level
03. EQ control high EQ setting for high frequencies
04. Peak indicator The peak indicator prevents the amplifier outputs from overdriving the
transducers. It lights up when the limiter is activated. It is okay for the peak
indicator to blink occasionally, but if it blinks frequently or lights up continuously,
turn down the level control.
05.Master volume This knob adjusts all signal input or mic level.
06. EQ low control EQ setting for low frequencies
07. Low cut/full range
switch
When the switch is turned off, the top speaker can be used as a full range
speaker.
08. Through
(full range output)
Male XLR-type connector that produces exactly the same signal that is connected
to the main input jack. Use it to daisy-chain several active systems of the same
signal source together.
09. Main input Female XLR-type connector that accepts a balanced line-level signal from a
mixing console or other signal source.
10. Power switch Use this switch to turn the system on and off. Make sure the signal source level
control is turned down before you turn it on.
11. Power in This is where you connect the AC line cord to provide AC power. Plug the line cord
into an AC socket properly configured for your particular model.
12. Fuse holder When a problem occurs in this system, the fuse will cut off the power. To replace,
use a standard fuse as specified.
13. Power out AC power out to top system or another active system which is equipped with
powercon-3.


Produkt Specifikationer

Mærke: König
Kategori: Højttaler
Model: OSP-SX110TA

Har du brug for hjælp?

Hvis du har brug for hjælp til König OSP-SX110TA stil et spørgsmål nedenfor, og andre brugere vil svare dig